User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 68 /Bedienungsanleitungen/Geräte neutral/8.2_Ü2_Troubleshooting @ 0\mod_1251203477457_912.doc @ 3102 @ 23<br />
Pos: 69 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/8.2a_Ü3_The device cannot be turned on @ 3\mod_1280834344948_912.doc @ 24470 @ 23<br />
8.1.3 How to reset the printer<br />
To reset the printer to the factory settings, you have to start the printer in a special mode.<br />
Non-Mechanical Reset (resets all settings, except for mechanical settings):<br />
1. Turn off the printer<br />
2. Press AND hold the following key: Quick<br />
3. Turn on the printer<br />
4. Keeping holding the Quick key until the printer shows<br />
Non-Mechanical Reset<br />
Alignmt Values Saved<br />
5. Release the Quick key and the printer will be ready to use.<br />
Default Reset (resets all settings):<br />
1. Turn off the printer<br />
2. Press AND hold the following key: Home<br />
3. Turn on the printer<br />
4. Keeping holding the Home key until the printer shows<br />
Printer XXX<br />
Default Reset<br />
5. Release the Home key and the printer will be ready to use.<br />
Mechanical settings<br />
Make sure to re-enter all required mechanical settings (e.g. ADJUST<br />
TOF) after performing a default reset!<br />
8.2 Troubleshooting<br />
<strong>User</strong> Manual Version 3.1 95