User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 60.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Warning_Factroy_setting @ 1\mod_1259054235982_912.doc @ 7641 @<br />
Pos: 60.26 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_1500_BOOT_DEFAULTS @ 0\mod_1254483976902_912.doc @ 4057 @<br />
Pos: 60.27 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_BOOT DEFAULTS settings remain after printer reset @ 2\mod_1275288488760_912.doc @ 17703 @<br />
Pos: 60.28 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1504_PC PROGRAMM @ 0\mod_1254489913867_912.doc @ 4168 @<br />
ADJUST TOF<br />
The “Top of form” (TOF) sensor or paper sensor detects the edge of every fed paper and<br />
controls the timing of the print heads. To ensure a correct positioning of the printed image<br />
an adjustment value is set in this menu.<br />
To make an adjustment press Quick + (Test Print). The AS-930 will now print an<br />
adjustment page with the one print cartridge, closest to the feeder. Measure the distance<br />
between the paper edge and the printed bars. See Figure 23 below. Enter the measured<br />
distance in the printer menu and press the Ok button.<br />
Figure 23: ADJUST TOF test print<br />
Factory setting<br />
This is a default setting, entered at the initiation of the machine in the<br />
factory. The user should change this setting only in case of a printer<br />
malfunction and after consulting a technician.<br />
BOOT DEFAULTS<br />
All settings made in this menu apply for all print jobs and are retained after switching off<br />
the printer.<br />
• Select BOOT DEFAULTS in the PRINTER CONFIG. menu and hit the Ok key. You will<br />
be presented the following choices:<br />
BOOT DEFAULTS settings remain after printer reset<br />
The settings in the BOOT DEFAULTS menu cannot be changed by<br />
resetting the machine (neither by a "Non-Mechanical Reset" nor by a<br />
"Defaul Reset"). The boot default settings have to be changed in the<br />
BOOT DEFAULTS menu.<br />
50 <strong>User</strong> Manual Version 3.1