2 - ClamSITel

100
It's always bothered us to have to pay a high price for an individually packaged
hardware part. It's no fault of the manufacturer that the packaging costs him
more money than the part itself. But you don't have to pay for that packaging
with our bulk packs. You'll also find that it's very handy having an adequate supply
of parts hanging on your workshop wall. This beats running out of parts
Clevises, Keepers
25 "Better"
RC Metal
Clevises
HLH803
$9.99
These metal clevises are unique in the RC hobby
because they are solderable and threaded. They
have the regular 2-56 threads that fits the standard
threaded rods. These clevises are plated for easy
soldering to a metal rod or to our Flex Cable Pushrod.
They come also in pack of 2 clevises.
HLH503 Better Metal Clevises, 2 ............ $ 1.00
HLH817 10 “Better”
4-40 Metal Clevis, ............................. $5.99
Same solderable metal clevis as in HLH818,
without the rods.
Bulk
"Better"
18 RC
Metal Clevises with 11" Rods
HLH804 ... $7.99
These are the same clevises as our HLH803.
Included are 11" rods that are threaded at one
end. The threaded end can be cut off and
screwed into our nylon pushrod (HLH808).
HLH804R 11" Threaded Rods only, 36 rods ... $3.99
HLH508 Metal Clevis & 11” Rod, 1 ea. ........... $ .0.79
HLH504 11” Rod, 3/4” Thread, 2-56, 1 ea. ...... $ .0.29
10
"Better"
4-40
Metal Clevises w/8" Rods
HLH818 ... $10.99
Included are 8" rods that are threaded at one end.
The thread is cut with a die not rolled.
25 Mini
Nylon
Pop
Clevises
with 11" Rods
HLH811 ........ $6.99
Same rod as in HLH804.
35 Mini Nylon
Pop Clevises
HLH812
$7.99
These small clevises are very strong. They have
a ball on the clevis pin that snaps into place when
the clevis is closed. Very secure.
HLH526 Mini Nylon Pop Clevis, 2 ...................... $0.59
30 "Better"
Swing Keepers
HLH832
$5.99
"Better" for 3 reasons:
(1) Longer legs permit more servo output rotation
without binding the pushrod; (2) heavier construction
than their two competitors; (3) these are made
in "rights" and "lefts" for easier installation next to
a fuselage sidewall.
HLH529 Swing Keepers, 4 .................................... $ 0.99
Bulk Hardware
Huge savings compared to what you have to pay for individually packed hardware items!
10 Threaded
Ball Links
HLH813
$9.99
Ball Links
Excellent connectors
on top of servo wheels to pushrod, throttle
arm connection to pushrod, aileron servos.
These ball links are the fourth type we've had
and mate more precisely.
HLH528 Threaded Ball Link, 1 ......................... $1.39
10 Larger
Threaded
Ball Links
HLH842
$6.99
Larger than our HLH813. The nylon socket part
is just under 7/8" long. The threaded portion of
the stud is 3/8" long. The threaded stud is .085"
dia. -- a little less than 3/32". HLH813 (the
smaller Threaded Ball Links) are satisfactory for
most RC uses. These are good where you
need even more strength.
Pushrod Connectors
15 Pushrod
Connectors
HLH819
$11.99
1/4” high barrel, 7/16”
overall. Is held on to servo output wheels with
secure star lock. Large round barrel can be
held easily with pliers during installation and
adjustment. Control rod is held securely in
place with a socket set screw allowing a lower
profile. Includes a hex wrench.
HLH502 Pushrod Connector, Pk of 2 - $1.59
Bulk Package
30 Starlocks
HLH820$3.99 for Bulk
Pushrod Connectors
The starlock on our HLH819 secures the Pushrod
Connector so permanently to a servo output wheel
that you must destroy the Starlock to remove the
Pushrod Connector. The safety of our Pushrod
Connector is terrific, but you needed a source for
Starlocks so you can reinstall the Connectors.
when you're trying to build a plane Sunday night. Quality The parts we're selling
are our best shot at providing the best parts we can find. In fact, we've consistently
upgraded many of these parts without ever advertising that fact.
920 Feet
Flex Cable
Pushrod
HLH805
$7.99
20 feet of Nylon outer tubing and 20 feet of 1/16"
diameter bronzed cable. The cable used here is
very good and very expensive for us to buy. It is
bronzed for easy soldering, the ends don't "friz"
when cut and the fit inside the nylon outer tube and
into threaded coupler HLH809 is perfect. These
are excellent for throttle pushrods and when used
for other controls such as aileron, steerable nose
gear, rudder, elevator will give a more precise control
than all nylon pushrods.
Threaded Couplers,
Threaded Studs
15 Threaded
Couplers
HLH809
$4.99
Greater strength in the threads: Machined
nickle-plated steel with one end threaded 2-56
to accept either metal clevis HLH803 or nylon
clevis HLH812. The other end is a hollow tube
that accepts the cable pushrod (HLH805) perfectly.
HLH527 Threaded Couplers, 2 ..................... $ 0.89
Threaded
Studs, 20
SUL498
$2.59
1" long, threaded full length with 2-56 threads.
Threads into the end of the small Nylon Pushrod
Tube (the moving portion of HLH808 Nylon Tube
Pushrod) so that clevises can be scfrewed onto
the ends. Metal Clevises HLH803 or Mini Nylon
Pop Clevises HLH812 screw onto these.
Nuts, Bolts, Blind Nuts
50 -- 4-40 &
6-32
Bolts & Nuts
HLH843
$6.99
25, 4-40x1-1/4” bolts, 25, 6-32x1-1/4” bolts,
plus hex nuts, flat washers and lock washers to
fit. 50 bolt-nut-washer sets (200 pieces) in the
Bulk pack - Twelve times the usual 4-set quantity
you buy!
40 Blind Nuts
$6.99
HLH848 4-40 Blind Nuts
HLH849 6-32 Blind Nuts
High quality plated blind nuts at half the cost of the
small packages of blind nuts. Order HLH843 if
you need bolts and washers for the blind nuts.
HLH548 4-40 Blind Nuts, 4 .................................... $ 0.89
HLH549 6-32 Blind Nuts, 4 .................................... $ 0.89
Flex Cable and Nylon Tube Pushrods
Your R/C Superstore • (866) 512-1444
25 Feet
Nylon Tube
Pushrod
HLH808
$9.99
The inner tube accepts 2-56 threaded rod firmly.
Screw Threaded Studs HLH845 into the
small nylon tubing. Either a metal or nylon clevis
can be screwed onto the threaded rod giving
you an adjustable control rod.
The fit between the inner and outer nylon tube
is critical to accurate and free-moving control in
this type of pushrod. We test each batch of
tubing for this critical fit before packaging.