2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TELEMASTER<br />
NEW! Radio Ready airplane with both regular and aileron wings included<br />
Radio ______________<br />
SPM5500 Spektrum DX5e<br />
Transmitter, AR500 Receiver,<br />
no Servos ............................. $99.99<br />
Battery _____________<br />
TP21003SPL2 Pro Lite V2 3 Cell 2100<br />
mAh 11.1V 20C LiPoly Pack ... $47.99<br />
Charger ____________<br />
SRC506 IC6 Balance Charger for<br />
1-6 LiPoly Cells .................. $75.99<br />
DEA1300 Deans Ultra Plug<br />
connectors, Pair .................. $3.49<br />
HLA115 Hobby-Lobby Mini Telemaster RR w/2 Wing Sets .............................................. $189.99<br />
47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz. flying weight. Mini-Telemaster is now<br />
offered as a Radio Ready airplane. Two wing sets are included; begin with the regular wings<br />
(without ailerons) and when you want to move up to 4-channel control just switch to the included<br />
aileron wing set. Airplane is pre-built and pre-covered, a brushless 1300Kv outrunner motor and 30A speed<br />
control are pre-installed. The elevator and rudder servo are installed and ready to be plugged into the<br />
receiver. Nearly all the building has been done for you, what remains can be done without glue in less than an<br />
hour. The main landing gear is pre-bent wire and the tailwheel is steerable. When it comes to flying,<br />
Mini-Telemaster flies like a Telemaster: Smooth, responsive, and predictable. It still has all of the gentle<br />
handling and slow flight characteristics of the larger Telemaster airplanes. The difference is it can be flown in a<br />
much smaller area. For 3 or 4 Channels: Elevator, Rudder, Ailerons (optional) and Throttle.<br />
No time to build the kit Now an Almost Ready to Fly airplane<br />
Almost - Ready - to - Fly<br />
Radio<br />
HTR48725 Hitec "Neon 3" FM<br />
with Micro 05 Receiver, 2 HS-55<br />
Servos ............................. $69.99<br />
Motor, Prop Adapter, Prop<br />
PS220834 AXI Silver 2208/34<br />
OUTRUNNER Motor ........ $49.99<br />
PM22002 Radial Mount Set for<br />
AXI 22 Series Motors ..... $12.99<br />
P08060SF APC 8X6 Slowflyer<br />
Prop ................................... $2.40<br />
Motor Controller<br />
JEE012 Jeti ECO 12 Amp<br />
Brushless Controller ...... $39.99<br />
Battery<br />
TP21003SPL2 Pro Lite V2 3<br />
Cell 2100 mAh 11.1V 20C<br />
LiPoly Pack ..................... $47.99<br />
HLA114 Hobby-Lobby "Mini-Telemaster" ARF ...... $74.99<br />
47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz.<br />
flying weight. Up until now, if you wanted a Mini-Telemaster,<br />
you had to build one yourself. Not any longer. Mini-Telemaster is now offered as an ARF. Airplane<br />
is pre-built and covered. The hard building has been done for you. Assembly takes only about 3<br />
hours and consists of gluing the wing halves together, installing the tail<br />
parts to the fuselage and installing the radio equipment. The main<br />
landing gear is pre-bent wire and the tailwheel is steerable. When it<br />
comes to flying, Mini-Telemaster flies like a Telemaster. Smooth,<br />
responsive, and predictable; it still has all of the gentle handling and<br />
slow flight characteristics of the larger Telemaster airplanes. The difference<br />
is it can be flown in a much smaller area. For 3-Channels: Elevator,<br />
Rudder and Throttle.<br />
HLA114W Main Wing with Ailerons for Mini-Telemaster ........ $31.99<br />
A simple direct replacement wing with strip ailerons, installs on your Mini-Telemaster with no modifications. The wing is the<br />
same size and area as the original wing. The dihedral has been reduced for use with ailerons. Comes in two<br />
panels, each pre-covered with the ailerons pre-hinged and torque rods in place. Wing joiner must be epoxied together<br />
and then the wing halves must be glued together with epoxy. An aileron servo must be installed<br />
(HS-81 servo not included) and connected to the aileron torque rods with the included hardware. 4-Channel radio<br />
required for this application. Decal set included.<br />
Charger<br />
ETC2030 Smart Charger for<br />
1-3 Li-Poly or 1-8 NiCd/NiMH<br />
Cells .................................. $39.99<br />
BAT221 Charger Adapter,<br />
JST to Speed 400 .............. $6.49<br />
DEA1300 Deans Ultra Plug<br />
connectors, Pair ................ $3.49<br />
www.hobby-lobby.com • Order Online 24/7 17