2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
76<br />
Electric Accessories<br />
LiPo Cell Voltage/<br />
Battery Chargers, Lithium (cont.):<br />
Balance Checker<br />
NEW! Keep your precious Li-Po and Li-Fe<br />
batteries in perfect balance<br />
NEW! Balance charger<br />
includes temp sensor and<br />
Thunder Power adapters<br />
SRC506 iC6 LiPlus Intelligent Digital<br />
Balance Charger ...................... $75.99<br />
5-5/8" x 3-3/8" x 1-3/8". Multi use<br />
charger for LiIon/LiPo/LiFe 1-6 cells,<br />
NiCd/NiMH 1-15 cells, Pb 2-20V. Includes<br />
adapters for "Deans style" plugs, JST, Rx<br />
pack, glow plug lighter, and alligator clips.<br />
Balance plugs on end of unit are JST-XH<br />
type and compatible with many Asian<br />
packs. An adapter for Thunder Power and<br />
Flight Power battery packs is included.<br />
Temperature probe included. NOTE:<br />
When balance charging Lithium batteries<br />
both the balance tap and the main power<br />
wires must be connected to the charger.<br />
NEW! Charge and Balance your Thunder Power<br />
and Flight Power Batteries on IC6 Chargers<br />
SRC510 TP/FP Adapter for IC6 Chargers ................................ $9.99<br />
1-1/8" x 2-1/8" x 1/2" Adapter for from 2S to 6S<br />
Thunder Power or Flight Power Lithium battery packs.<br />
Allows you to charge and balance your TP or FP<br />
packs with your IC6 Balance Charger or any charger<br />
or balancer that uses the JST-XH female connectors.<br />
NEW! Charge and Balance your Hyperion and<br />
PolyQuest Enerland Batteries on IC6 Chargers<br />
SRC513 HP/PQ Adapter for ........................................... $9.99<br />
1-1/8" x 2-1/8" x 1/2" Adapter for from 2S to 6S<br />
Hyperion or Poly Quest (Enerland) Lithium battery<br />
packs. Allows you to charge and balance your HP<br />
or PQ packs with your IC6 Balance Charger or any<br />
charger or balancer that uses the JST-XH female<br />
connectors.<br />
Battery Chargers, NiMH, NiCd<br />
Charge 5-7 cell tiny to large NiCad and<br />
NiMH packs at rates from 0.1 to 5 amps<br />
GR6419 Graupner<br />
Ultramat 5 Charger .............. $64.99<br />
Tiny and portable: 4.2”x2.4”x1”. From<br />
your 12V automobile battery, this<br />
automatically charges 5 to 7 cell<br />
packs. It charges nicad or NiMH<br />
packs at rates of 0.1A to 5A, then<br />
goes to a trickle charge when complete. Note that it will charge even<br />
the tiniest packs —100mAh packs, for example — safely.<br />
20, 30 or 40 amp<br />
Power Supplies<br />
HW1220 Power Force 20 ...... $58.99<br />
HW1230 Power Force 30 ...... $79.99<br />
HW1240 Power Force 40 ...... $99.99<br />
Plug into your 110/120V AC house current,<br />
then connect up to three 12V DC<br />
field chargers to it. Converts 110-120V<br />
AC power into clean 12V DC power. Converter will handle currents up<br />
to 20, 30, or 40 Amps. A pre-installed grounded AC power cord is<br />
included as well as output terminals that accept banana plugs. On/off<br />
switch with LED power indicator on front panel.<br />
MKS5003 Precision Battery Balancer with LCD Screen ...... $58.99<br />
3-5/8" x 2-3/8" x 5/8", weighs 2-1/2 oz.<br />
Compact Balancer/Discharger for<br />
Li-Polymer and Li-Fe battery packs.<br />
Keeping your batteries in perfect<br />
balance is the key to long battery life<br />
and getting the best performance from<br />
your packs. Precisely measures<br />
individual cell voltage and pack voltage<br />
in 2-6 cell packs. Will balance the voltages<br />
of all the cells in a pack with the<br />
touch of a button. Can also be set to discharge a pack to a voltage level<br />
chosen by you. Is perfect for lowering the overall pack voltage for long<br />
term storage. The balance function can be executed before, after, or<br />
during the charging process. 2-6 cell packs with the JST XH balance<br />
connector plug directly into the unit. (Works with all of our RTF airplane<br />
Lipo battery packs.) The voltage of each cell (to the hundredth of a volt)<br />
is displayed on the LCD screen. During the balance function, a symbol<br />
is displayed beside the cells being discharged. Easy to use with very<br />
intuitive interface, also includes easy to understand illustrated instructions.<br />
Receiver battery voltage can also be measured, but this requires<br />
an outside voltage source of 7.4-11V with a JST connector.<br />
A "Gas gauge" for your lipo packs<br />
Never launch a plane with a near empty pack again<br />
LBC400 "CellMeter-4" 2-4 Cell LiPo Cell Meter ..................... $99.99<br />
Test your valuable 2-4 cell LiPo packs quickly to determine their state<br />
of charge and their state of balance. LCD screen shows "fuel gauge"<br />
from empty to full and balance gauge showing state of balance.<br />
Second screen is activated by pressing a button. It shows:<br />
number of cells, voltage of pack, percentage of charge and individual<br />
cell voltages to .01 of a volt. Third screen (press button again) shows<br />
individual cell voltage to .001 of a<br />
volt. The balance connector on your<br />
battery plugs directly into CellMeter-<br />
4. If cell voltage is below 3.0 volts<br />
per cell or if cells are out of balance<br />
a warning message will flash on the<br />
LCD screen and a beep tone will be<br />
heard. The 2.5mm pin-spacing on<br />
CellMeter-4 connects directly to<br />
Poly-Quest, Art-Tech, RCer, RICCS,<br />
and E-Sky LiPo packs.<br />
LBC800 "CellMeter-8" 2-8 Cell LiPo Cell Meter ................... $134.99<br />
Same features as CellMeter-4 but will test 2-8 Cell LiPo packs. In<br />
addition the meter displays the voltage of the highest and lowest cells<br />
and displays the differential between them to .001 of a volt.<br />
LBCA25 Adapter for Thunder Power/Flight Power 2-5 Cell Packs<br />
....................................................................................................... $8.99<br />
Use this adapter for either CellMeter-4 or CellMeter-8 if testing<br />
Thunder Power or Flight Power batteries.<br />
LBCA26 Adapter for Thunder Power/Flight Power 2-3 and 6 Cell<br />
Packs ........................................................................................... $8.99<br />
Use with LBC800 CellMeter-8 only. Adapts 2, 3, or 6 cell packs to<br />
CellMeter-8. 4 and 5 cell packs use LBCA25.<br />
Keep your new Thunder Power lithium<br />
batteries balanced for long service life<br />
TPB205 Thunder Power 2-5 Cell LiPo<br />
Balancer .................................. $59.99<br />
3-5/8" x 1-1/2" x 1/2" Use with Thunder<br />
Power Lithium batteries. Auto detects the<br />
cell count from 2-5 cells. Plug your battery<br />
into the cell balancer to check the condition<br />
of your battery. Status is indicated by<br />
LED's, if an imbalance occurs the LED's<br />
flash. Battery can be returned to a balanced state by recharging at a<br />
reduced charge rate while monitoring with the cell balancer. Batteries<br />
can be charged with any Lithium battery charger. Monitoring your batteries<br />
while charging is safer too, the balancer monitors each cell in<br />
your pack and gives an audible warning if any cell exceeds 4.3V,<br />
charging must be halted immediately! Cell balancer indicates charge<br />
completion with an audible tone.<br />
Your R/C Superstore • (866) 512-1444