2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Graupner's Speed 600 outboard<br />
for sport and racing boats<br />
GR2370 Graupner GTX-650<br />
Speedline Outboard Motor ....................... $99.99<br />
7-1/4" tall overall, 2" wide, weighs 12.3 oz. Includes<br />
a Speed 600 Race 7.2 V motor with noise suppression<br />
and hook up wire. Power is transmitted from<br />
the motor to the propeller by means of a flexible<br />
shaft running in an efficient and virtually wear-free<br />
Teflon sleeve. The standard Speed 600 Race 7.2 V<br />
electric motor is good for medium-sized model<br />
boats; other motors of the Speed 500, 600 and 650<br />
series can also be installed. The outboard motor is<br />
mounted using 4 screws. Installed height can be<br />
adjusted 1/4”. The thrust angle can be adjusted + or – 5 degrees. Has<br />
water pickup for optional motor cooling coil (HLB211)<br />
Scale manuverability<br />
for a Scale Ship<br />
GR1785 Graupner<br />
Bow Thruster with<br />
Speed 400 motor ......... $38.99<br />
6-1/2” long. Can be shortened<br />
to 2”. Complete unit with SPEED 400 electric motor. Bow thrusters<br />
are found on most full scale large ships. They permit side to side bow<br />
movement in tight places without having to go forward or backward.<br />
Jet Drives for Electric Motors<br />
JET drive for<br />
smaller boats<br />
GR2344 JET Drive “Pro-2<br />
Small” ................... $59.99<br />
For smaller boats to 30” long. Consists of ABS suction pipe, injection<br />
molded parts: impeller pipe, 29 mm impeller, thrust jet, guide vanes,<br />
control jet, tiller, and a stern tube with shaft. Basic unit for forward travel<br />
only. To reverse, order Reversing Mechanism GR2344/1. Length:<br />
7-1/2”. Length with Reversing Mechanism: 8-1/4”. For SPEED 700<br />
motor GR3308.<br />
GR2344/1 Reversing Mechanism for<br />
JET Drive “Pro-2 Small” .......................................................... $26.99<br />
This set contains an injection molded flange and an ABS reversing flap.<br />
GR2340 Basic JET Propulsion Boat<br />
Drive ............................................ $99.99<br />
11-3/8" long x 2-1/4" wide x 2-3/4" high.<br />
This is a copy of a full scale jet boat drive<br />
system. The basic unit allows forward<br />
travel only and steering. The turbine and chambers are made of injection molded<br />
nylon. The design and quality of the system is in the tradition of Graupner’s famous<br />
high quality propellers for boat and aircraft use. Shafts and bearings are corrosion<br />
resistant. Boats fitted with the JET drive can run in very shallow water since there is<br />
no rudder, prop shaft, or propeller hanging down. Power each JET drive with a<br />
SPEED 700 motor GR3308.<br />
GR2340/1 Reverse Mechanism,<br />
Jet Drive ................................. $26.99<br />
Order this to add reverse to your JET<br />
drive. When the reverse mechanism is lowered, the water<br />
stream is deflected forwards and the boat runs in reverse.<br />
When you lower the reverse mechanism at about half<br />
throttle, and give a rudder command, the boat rotates on a<br />
dime!<br />
GR2341 Toothed Belt Gearbox 2:1, Jet Drive........................................ $34.99<br />
Allows the motor to run at very high RPM. Reduces current draw by about half and<br />
doubles the running time. This might be desirable if you are using high speed<br />
motors .<br />
GR2736 Graupner Micro Speed 10<br />
Controller with Reverse ..... $88.99<br />
For 2 to 12V input, 10Amps constant<br />
current, 20 Amps max (one minute),<br />
30 Amps max (1 second). Weight one<br />
ounce, 1-7/8” x 7/8 x 3/8”.<br />
Boat motor controller<br />
with REVERSE<br />
60 Amp Proportional Boat Motor Controller for<br />
8 to 30 cells!<br />
JE600N Jeti JES 60 “Navy”<br />
Water Cooled Boat Motor<br />
Controller ............................. $77.99<br />
Our best speed controller for fast<br />
boats. 2x1x9/16”, about 1.5 oz.<br />
including wires. For 8 to 30 cells.<br />
Maximum currents: 6 cells — 25<br />
amps, 7 cells — 35 amps, 8 cells — 50 amps, 10 cells or more — 60<br />
amps. Water-cooled! “Navy” has inlet and outlet for water cooling. It<br />
has adjustment for setting the motor start point and a two color LED<br />
that indicates Zero power and Max power even without a motor connected.<br />
There is no BEC -- use a separate receiver battery. “Navy” has<br />
Opto coupling which keeps the controller free from motor induced interference.<br />
There is a current limiter to prevent burnout. No reverse.<br />
Water-cooled programmable brushless<br />
boat controller with Reverse<br />
JESAP50N Jeti "Advance 50"<br />
Navy Brushless Controller<br />
with Program Card ........ $137.99<br />
2-1/2" x 1" x 5/8", weighs 48 grams<br />
(1-3/4 oz.). With BEC active you<br />
can use 6-12 NiMH/NiCd, 2-4 Li-<br />
Poly, 5-17V, 5V BEC circuit. With<br />
BEC circuit de-activated (must use<br />
separate 4.8V battery for receiver<br />
and servos) you can use 6-16<br />
NiMH/NiCd, 2-6 Li-Poly, 5-25V.<br />
Maximum continuous current is 50 amps. Controller is water-cooled,<br />
connect water pickup lines to the two 4mm O.D. tubes. Comes with<br />
easy to use programming card. Six functions can be programmed with<br />
the card: Battery type (Ni-xx or Li-xx), Cut Off voltage (High or low),<br />
Power Limit (full power or 50% power), Reverse (off or on), Motor<br />
Timing (Low or High), Acceleration (Hard or Medium). Programming is<br />
retained even when battery is unplugged. Can be re-programmed in<br />
seconds if a change is desired. Unit has a built-in BEC (battery eliminator<br />
circuit) that can be used to run your servos and receiver from<br />
your motor batteries as long as they have a voltage under 17V. For<br />
boats with up to 25V power, the controller can be used without the<br />
BEC function. Comes with clear instructions for programming and use.<br />
Controller has gradual low voltage cut-off and is temperature overload<br />
protected.<br />
Waterproof receiver switch cover<br />
GR3940 Waterproof<br />
Switch Cover ............................. $5.99<br />
Fits the standard receiver switches that<br />
have the mounting screws 3/4" apart.<br />
Very soft rubber cover lets you move<br />
the switch.<br />
GR2345 JET Drive “Pro-2 Booster” .......................................... $58.99<br />
Length 8-3/4” (11” with Reversing Mechanism). Basic unit produces pure<br />
thrust forward only. Steerable and reversible when fitted with Steering & Reverse<br />
unit (GR2345/1).<br />
GR2345/1 Steering & Reverse for JET Drive “Pro-2 Booster” $33.99<br />
Adds steering and reverse capability to the JET Drive “Pro-2 Booster”.<br />
Motor for GR2345:<br />
GR6317 SPEED 700 BB Turbo 12 V Motor .................................... $44.99<br />
Dear Hobby-Lobby,<br />
I checked with three hobby stores searching for the Graupner CAM<br />
10X8 folding prop to fit my Radian. Nobody had it nor even tried to<br />
get it for me – until I spoke with Christina (Hobby-Lobby).<br />
Christina went out of her way to help. I told her the prop must be a<br />
6mm shoulder – that specification was not readily apparent, so she<br />
went & checked on it. About a minute later she was back with positive<br />
confirmation; “yes 6mm shoulder & yes Radian owners use this prop &<br />
like it.”<br />
Thank you, Christina, for solving my problem and helping me.<br />
Thanks Hobby Lobby for having the part in stock.<br />
New Happy Customer,<br />
Stephen V.<br />
www.hobby-lobby.com • Order Online 24/7 113