27.01.2015 Views

2 - ClamSITel

2 - ClamSITel

2 - ClamSITel

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Model Motors has the most complete selection of OUTRUNNER brushless motors available today. AXI OUTRUNNER motors are made of the<br />

highest quality materials and workmanship. They also have the best warranty on the market today. Every Czech manufactured AXI motor is a<br />

highly efficient, high torque, maintenance free rotating can (OUTRUNNER) brushless motor with strong neodym magnets. The use of a gearbox<br />

is NOT necessary. The hardened steel motor shaft is supported by 2 ball bearings in the 22-28 series motors, and 3 ball bearings in the<br />

41-53 series motors.<br />

The larger AXI motors easily replace old outdated glow engines. AXI motors fly .40-1.20 size airplanes with more power and authority than the<br />

weaker glow engines.<br />

Understanding AXI OUTRUNNERS<br />

Each AXI motor has a 6 digit numbering system. For example: 2208/34. The first<br />

two numbers (22) represent the diameter of the stator (the fixed part in the middle<br />

of the motor) in millimeters. The second two numbers (08) represent the<br />

length of magnets (attached to the rotating case) in millimeters. The third set of<br />

two numbers (34) represents the number of wire winds, also called turns.<br />

When comparing the motors within any series (2208, 2212, etc.) there are several<br />

characteristics that you will notice. Motors with higher winds spin slower for<br />

every volt of electricity applied, they have a lower Kv (RPM/V). They spin a larger<br />

propeller at slower speeds and at a lower current than low turn motors. Motors<br />

with lower winds spin faster for every volt of electricity applied, they have a higher<br />

Kv (RPM/V). They spin a smaller propeller at higher speeds and at a higher<br />

current than high turn motors.<br />

To determine the motor for your model: analyze the character of your airplane, is<br />

it sleek and fast, or a slower plane with a lot of drag For the high speed airplane<br />

a low turn motor that spins a small prop fast would be the right choice. For a<br />

Trainer or Biplane with a lot more drag, a high turn motor that can spin a much<br />

larger prop and produce a lot of thrust at low speed is what you want.<br />

Whatever your airplane, Model Motors makes a high quality OUTRUNNER motor<br />

capable of flying it like nothing else.<br />

18-1/2 gram motors for indoor models to 9 ounces<br />

PM2203R AXI Gold 2203/Race OUTRUNNER Motor .. $69.99<br />

PM220346 AXI Gold 2203/46 OUTRUNNER Motor ..... $69.99<br />

PM220352 AXI Gold 2203/52 OUTRUNNER Motor ..... $69.99<br />

Specs: 18-1/2 grams, 1-3/32" diameter, 3/4" case length, 3mm carbon<br />

shaft. Includes built-in 3 point radial mount and flexible prop adapter<br />

with O-ring for GWS and APC props. The best lipoly for light indoor airplanes<br />

is a 2 cell 300 mAh pack; for heavier indoor/outdoor airplanes<br />

use a 2 cell 400 or 800 mAh lipoly pack.<br />

OUTRUNNER KV (RPM/V) Prop/Battery Combo Battery Range Motor Controller Airplane size range Type of Flying<br />

2203/R 2300 2s lipo - 7x3.5 2 LiPoly 8 Amp-JAPO8 3.5-6 oz. Indoor 3D<br />

2203/46 1720 2s lipo - 8x3.5 2 LiPoly 8 Amp-JAPO8 3.5-7.5 oz. Indoor 3D<br />

2203/52 1525 2s lipo - 8x3.5 2 LiPoly 8 Amp-JAPO8 3.5-9 oz. Indoor 3D<br />

58<br />

Your R/C Superstore • (866) 512-1444

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!