2 - ClamSITel

Lightweight aerobatic and 3D performer
GR9578 Graupner "Extra 300S Elektro" ARF .... $149.99
42-7/8" wingspan, 36-5/8" long, 363 sq. in. wing area, 34-1/2 oz.
ready to fly weight. Almost-ready-to-fly, ultra-lightweight aerobatic
trainer with excellent flying characteristics and performance. The
aircraft is laser cut balsa and plywood with reinforcements fitted at
highly stressed areas. Fuselage, wings, tail plane and fin are
factory-built and pre-covered with iron-on film. The canopy and
upper hatch are removable for access to the flight battery and
servos. The large wing area makes it a very good-natured, neutral
flying airplane, capable of all pattern style maneuvers. Two-part
wing makes it easy to transport and store. Assembly takes 6-8
hours; the included illustrated instruction manual is clear and takes
you step-by-step. Decals, lightweight wheels and small accessory
parts are included. Controls are: Ailerons (2 servos), Rudder,
Elevator and Throttle.
Aerobatic and 3D Flight
Designed as an electric airplane--- Light and easy to fly
Radio __________________
SPM6600 Spektrum DX6i Full Range
Transmitter w/o Servos MD2
................................................... $199.99
Four - HTS055 Hitec HS-55 Servos
@ $13.99 ea. .............................. $55.96
Two - HT0099 Hitec 6” Aileron
Extension Cable @ $5.59 ea ... $11.18
Two - HT0097 Hitec 12” Aileron
Extension Cable @ $5.99 ea .... $11.98
Motor, Prop _____________
PM281412 Model Motors AXI Gold
2814/12 Outrunner Motor ......... $94.99
PE10070E APC 10X7E Prop ....... $2.70
MJ4703 Collet Prop Adapter for 4mm
Shaft,M6 ............................................ $4.49
HLHS150W 1-1/2” Spinner, White .. $2.00
PM280802 Model Motors Radial Mount
Set for 2814 ................................ $16.99
Motor Controller ___________
JAP40 Jeti ADVANCE Pro 40 Amp
Brushless Controller ................ $99.99
Battery _________________
TP33002SPL2 2-Cell 7.4V 3300mAh
“Pro Lite V2” 20C LiPoly Pack .. $54.99
Charger ________________
SRC506 IC6 Balance Charger for 1-6
LiPoly Cells ............................... $75.99
GR9574 Graupner “Electro Kadett” ARF ...... $199.99
63" wingspan, 43-1/4" long, 744 sq. in. wing area, 57 oz.
flying weight. 11 oz. per sq. ft. wing loading. Laser cut
built-up balsa and plywood construction. The wings are rib
and spar construction, completely pre-built and
pre-covered. Motor cowl and wheel pants are pre-finished
fiberglass. Landing gear is anodized aluminum. Laser cut motor mount is ready for your AXI motor.
The correct side and down thrust is already built in. Flight battery is easy to install through the hatch
under the nose. A great second airplane with smooth and predictable flying characteristics. Lots of
power for short take-offs even from the grass and so light it floats
in slowly for easy landings. Very stable with a gentle stall and
quick recovery. As easy to fly as a trainer but with enough power
to practice more advanced maneuvers. Rolls, loops, inverted,
even sustained knife-edge is easily accomplished.
Photo-illustrated instructions are clear; assembly time is about
4-6 hours. Flight time is about 8-12 minutes. For 4 channels:
Ailerons (2 servos), Elevator, Rudder and Throttle.
Radio ______________
SPM6600 Spektrum DX6i DSM2 6-
Ch. Radio, AR6200 Rx, no servos
........................................... $199.99
Two-HTS081 Hitec HS-81 Servo
@ $16.49 ea. ................... $32.98
Two-HTS225BB Hitec HS-225 Ballbearing
Servos @ $20.99 ea. ....... $41.98
Motor, Prop, Spinner _____
AM292110 Atlas 2921/10
OUTRUNNER ..................... $49.99
PE11070E APC 11X7 E Prop $2.90
GR1385/45 Graupner 45mm
Precision Spinner, 5mm Shaft
.............................................. $18.99
Motor Controller _______
ABC45 Atlas 45 Amp Brushless
Controller .......................... $67.99
Battery _____________
TP33003SPL2 3-Cell 11.1V 3300mAh “Pro
Lite V2” 20C LiPoly Pack .. $79.99
Charger ____________
SRC506 IC6 Balance Charger for
1-6 LiPoly Cells .................. $75.99
www.hobby-lobby.com • Order Online 24/7 37