2 - ClamSITel

92
Long Extensions for aileron
servos
One end plugs into receiver. Servo plugs
into other end. Useful when servos are
mounted in the wing out near the ailerons
or for servos mounted in the tail of a plane.
24” long Extension Cable for Aileron Servos, each ............... $4.99
HLAE320 for Hitec/JR
HLAE321 for Airtronics (old style)
HLAE322 for Futaba J
36” long Extension Cable for Aileron Servos, each ............... $5.59
HLAE340 for Hitec/JR
HLAE341 for Airtronics (old style)
HLAE342 for Futaba J
Heavy guage aileron
extensions for high power
applications
These heavy-duty extension leads are
great for high torque servos when mounted
far away from the receiver. They are
made of 22-gauge wire and have gold connectors for solid contact and
full voltage transfer. Plugs are for Hitec and JR servos.
HT0600 3" HD Servo Extension (22 ga.) ................................ $4.99
HT0603 6" HD Servo Extension (22 ga.) ............................... $6.49
HT0604 12" HD Servo Extension (22 ga.) .............................. $6.69
HT0605 24" HD Servo Extension (22 ga.) .............................. $8.89
HT0606 36" HD Servo Extension (22 ga.) .............................. $9.79
Gyros
Positive lock for
servo plugs
GR3503 Graupner Servo Connector
Retaining Clip, 5 pcs. ..................... $9.99
Simple effective method of keeping your
servo leads connected.
Reduce glitches in long servo leads
Long servo leads can generate
electrical "noise" as your airplane
travels through the air, this in turn
creates glitches in your servos and
in extreme instances loss of control.
By simply wrapping the extension
around the ferrite noise reducer
at the receiver end of the extension,
glitches are eliminated. Use
5mm for standard servo leads and
8mm for heavy-duty servo leads. Use one per long servo lead.
GR98516 Graupner Clamping Ferrite Noise Reducer,
5mm ID ........................................................................................ $5.99
GR985161 Graupner Clamping Ferrite Noise Reducer,
8mm ID ........................................................................................ $7.99
Rock solid heading hold gyro with
lightning fast metal gear digital servo
HTS4192 Hitec HG-5000 Micro Gyro and
Digital Servo Combo ...... $179.99
Gyro: 7/8" x 7/8" x 7/16", 10 grams, operating voltage of 4.5 to 5.5
volts. Terrific gyro and servo combination for all 400-600 class helicopters.
All programming is done using the menu button on the gyro.
Programmable functions are: Gain, Direction, Servo speed, Rotation
rate and limit for both left and right stick inputs. Built-in temperature
sensor removes servo drift due to changes in temperature. Gyro works
with both analog and digital servos. Has remote gain adjustment.
HSG-5083MG Digital metal gear servo: 1-1/8" x 1/2" x 1-3/16", 21
grams, 20.85 oz./in. of torque, 0.07 sec/60 degrees (blindingly fast).
Digital metal gear servo for use with HG-5000 gyro only.
Non-programmable.
Servo Accessories
Mixers, Delay Modules
Fly V-Tail & Flying Wing planes
without buying a new radio!
GR3020 Graupner V-Mixer
for V-Tail or Elevons ....................... $39.99
Plug in this electronic mixer between your
receiver and servos for use in V-Tail, Flying
Wing and Delta Wing models. It makes
parallel and opposite mixing of 2 servo functions possible. Mix elevator
and rudder for V-Tail models, or elevator and aileron for Delta and
Flying Wing models. The mixer can also combine ailerons together
for use as flaps or speed brakes.
Delay Modules
Adjust the speed
of a servo
NFSD1 Servo Slow
Down Module .................................. $19.99
3/8" x 1" x 3/16", 3 grams. Tiny unit allows
you to adjust the speed of any proportional
servo from .7 seconds to 14.7 seconds in 16
steps. Plug module into the receiver channel
that you want to control, plug the servo into
module, and adjust the speed using the screw on the side of module.
Great for setting scale speed on retracts (with proportional servo) or
scale speed for operating flaps. The longer transition times are ideal for
marine models. Can be used to slow the operation of 2 servos with the
addition of a "Y" connector.
Voltage Regulator
Provide reliable power to your
receiver and servos
7/8" x 2" x 7/8", about 1-1/4 oz.
Regulator is designed to operate on
input voltages from 5 to 12 volts, allowing
you to power your receiver and servos
with a high capacity, yet lightweight,
Lithium Ion or Lithium Polymer battery pack. Why would you need this
If you have a larger model with many servos, particularly digital servos
that use a lot of current, you need a reliable power source of high
capacity. Regulator with failsafe switch is pre-wired and ready for use.
Should the switch or the wiring between the switch and regulator fail,
the regulator will stay in the "On" position and continue providing power
to your radio and servos.
DUR65051 Duralite Voltage Regulator
w/Failsafe Switch, 5.1V ............................................................ $57.99
DUR65060 Duralite Voltage Regulator
w/Failsafe Switch, 6V ............................................................... $61.99
Never crash another plane due to
a low receiver battery
DUR43051 Duralite Digital Load
Tester ........................................... $54.99
Reads input voltages from 4 to 18 volts. By
checking your receiver battery under load,
weak batteries or undercharged batteries can
be detected prior to the loss of your model.
Detector will check batteries under 1/2A, 1A,
or 1-1/2A loads depending on which button is depressed. Readout is
on a large clear digital screen. Unit is reverse polarity protected. Use
with Nicad, NiMH, Li-Ion and Li-Poly cells.
Incredibly bright LED
navigation lights
run for hours
AT3318 Super-Brite Flashers,
1 Red and 1 Green ............ $6.99
Approximately 1/2" thick, 3/4" x 7/8”
base. Flashers include foam mounting
tape, replaceable batteries, and a tiny slide switch to turn them on.
Your R/C Superstore • (866) 512-1444