2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
94<br />
Airborne Tricks<br />
Thick smoke trails for model<br />
airplanes<br />
Small Smoke Cartridges are 2-1/2” long,<br />
11/16” diameter, 2/3 oz. Large Cartridges<br />
are 2-1/2” long, 1-5/16” diameter, 2 oz.<br />
Both sizes produce about 4 minutes of<br />
thick smoke with the large cartridges producing<br />
a plume about twice the diameter<br />
of the small cartridge plume. Insert the cartridges in one of the two<br />
Carriers and attach the Carriers to your model’s wing or fuselage.<br />
RK7050 Small Smoke Cartridges, Assorted Colors, 5....... $26.99<br />
RK7051 Small Smoke Cartridges, White, 5 ........................ $26.99<br />
RK7060 Large Smoke Cartridges, Assorted Colors, 5 ...... $48.99<br />
RK7061 Large Smoke Cartridges, White, 5 ....................... $48.99<br />
RK7058 Carriers for Wing, 2 .................................................. $11.99<br />
RK7068 Carrier for Fuselage ................................................ $11.99<br />
Wreak havoc —<br />
spread destruction!<br />
HLH207 BOMB ................................... $5.99<br />
Our “exploding” bomb is molded of fiberglass-filled<br />
nylon so you can reuse it as often<br />
as you want. 5-1/2” long, its two halves<br />
pop apart on impact releasing flour or talcum in an impressive burst. The carrier<br />
release mechanism is strong and releases the bomb positively. Contains<br />
one bomb and one release mechanism.<br />
Bombs away (or water<br />
balloons) with “Jumper”!<br />
HLAD002 “Jumper” Drop Device<br />
Fully Built ................................... $15.99<br />
6-1/2" long overall. Lite-ply cargo bay is 3-<br />
1/8” x 3-1/8" inside. Attach to the side or belly<br />
of any R/C airplane with rubber bands. Weighs 4 oz. with a standard<br />
servo mounted. Single door is easy to load and control. Load it with<br />
anything you want, hit the switch on your radio, and out comes the payload.<br />
Includes double-sided servo mount tape. Paint or cover as<br />
desired. Servo not included. Requires one servo and one channel.<br />
HLAD003 Parachute for "Jumper".............................................. $8.99<br />
22” diameter. Rugged, the strings are sewn on and the border seam is<br />
rolled for strength. Braided strings eliminate tangles. High visibility red.<br />
Modeling Pins<br />
PP2006 1/4 Scale Sailplane<br />
Cockpit Details ...................................... $9.99<br />
Set of 5 injection molded plastic parts. Handles<br />
for the spoilers, landing gear, control stick and<br />
canopy as well as the microphone head and the<br />
T-handle for tow release.<br />
When a modeler makes<br />
the modeling pins you get<br />
modeling pins instead of<br />
dressmaking pins<br />
HLMO0002 HL/Modela Modeling Pins, 50 ....................................... $5.99<br />
Each pin is about 1-1/8” long. These have very narrow shafts and long taper<br />
points to prevent wood splitting. The metal shafts are bent 90 degrees inside<br />
the plastic end so they can not pull out. The plastic end has a shoulder so<br />
these can be used as compression clamps during gluing.<br />
Miscellaneous<br />
Super strong for critical control<br />
DUB675 Super Strength Long Servo<br />
Arms for Hitec ................................... $8.99<br />
An assortment of 8 high strength servo horns<br />
that fit Hitec servos from the HS-60 up<br />
through the full size HS-422. Great for those<br />
applications that require either high strength<br />
or the added throw of a longer control horn. We use these on a HS-85<br />
in our mechanical retract installations, it gives us the added throw<br />
needed for a solid lock both up and down.<br />
Never gouge a wing with a<br />
screwdriver again<br />
GR142 Graupner E-Z Turn Wing Bolts with<br />
Blind Nuts, 10 pair ................... $3.99<br />
1-9/16" long wing bolt with 1/4"-20 thread. Thumb-screw head requires<br />
no tools. Made from reinforced nylon, includes nylon blind nuts.<br />
LOW prices on knives and tool sets!<br />
HLT001 Small Knife .............. $1.99<br />
Takes HLT006 blades.<br />
HLT006 100 Pack P#11 Blades ....... $16.59<br />
Extremely sharp. 100 pack saves money.<br />
Fits small knife.<br />
HLT008 100 Pack Single Edge Razor Blades ..... $8.99<br />
Still the most useful blade of all. These are hard to find<br />
in stores.<br />
HLT004 Razor Saw Set ............. $7.99<br />
The Heavy Knife handle with fine and<br />
coarse stiff-back, thin razor saw blades.<br />
HLT003 Knife and Saw Set .......................... $33.99<br />
All 3 knives, Razor Saw, Miter box, burnisher, probe.<br />
Sander and large assortment of blades in a well<br />
made wood box.<br />
Tip Drill has 12 drill bits<br />
inside the handle<br />
KT569 Tip Drill with Bits ................ $8.99<br />
4” long, comes with 12 bits sizes 52-74 (the<br />
largest is 1/16” dia.). The easiest way to drill small holes, better than a crank<br />
tool or Dremel for small holes.<br />
Any balsa planer can plane with<br />
the grain — but very few can<br />
plane across the grain!<br />
Made of cast and machined aluminum, 3.3”<br />
long by 2” wide. This German made balsa<br />
planer uses double-edge razor blades. The<br />
amount of blade extension can be easily adjusted and blade replacement<br />
takes only a few seconds. The secret of using extremely sharp but<br />
very thin and flexible double-edge razor blades for balsa planing is in the<br />
blade clamping mechanism. This planer has a strong steel full width<br />
clamp and an accurately machined base.<br />
HLAE801 Sollingen Balsa Planer ......................................... $13.99<br />
HLAE802 5 Spare Blades ...................................................... $10.99<br />
Use to cut balsa sticks<br />
from sheet Balsa Wood<br />
Save up to 90%<br />
on balsa sticks!<br />
HLH625 Balsa Stripper ............................................................. $23.99<br />
Example: You can cut 10, 3/8” square sticks from a 4” wide sheet of our<br />
Bulk Sheet Wood. These sticks would cost you $6.00 if you bought them<br />
ready cut. Your cost for these 10 sticks if you cut them yourself is only<br />
$2.50!<br />
Our balsa stripper will accurately and easily cut balsa sticks 36” or 48”<br />
long, and up to 1/2” thick and 5/8” wide. It includes a 36” long extruded<br />
aluminum guide channel. This guide channel assures straight cuts even<br />
if the edge of the sheet wood is irregular.<br />
HLH6251 Extra Blades for Balsa Stripper, each ....................... $1.59<br />
Your R/C Superstore • (866) 512-1444