2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Good flying 3D Airplane--- at a GREAT price<br />
Aerobatic and 3D Flight<br />
SK055 Yak-55, Yellow/Pink .................................................... $29.99<br />
SK056 Yak-55, Blue/Black ..................................................... $29.99<br />
SK057 Yak-55, Red/Blue ........................................................ $29.99<br />
SK058 Yak-55, Red/Black ...................................................... $29.99<br />
Radio ______________<br />
SPM5500 Spektrum DX5e Full<br />
RangeTransmitter, ............. $99.99<br />
Three - HTS055 Hitec HS-55 Servo<br />
@ $13.99 ea. ....................... $41.97<br />
Motor ______________<br />
SK400XT Esskay OUTRUNNER<br />
Motor, 400XT ...................... $29.99<br />
Prop, Prop Adapter ______<br />
P10038 APC 10x3.8 Prop .... $2.70<br />
MJ8030 3mm Prop Adapter for<br />
APC Props ............................ $3.99<br />
Motor Controller ________<br />
JEE012 Jeti ECO 12 Amp<br />
Brushless Controller ......... $43.99<br />
Battery ______________<br />
TP9103SJPL2 3-Cell 11.1V 910mAh<br />
“Pro Lite V2” 20C w/JST ... $29.99<br />
Charger ______________<br />
ETC2020 Smart Charger for 1-3<br />
Li-Poly Cells ....................... $33.99<br />
32” wingspan, 29” long, 208 sq. in. wing area, 8 oz. flying weight.<br />
5-1/2 oz. per sq. ft. wing loading. Lightweight pre-printed foam<br />
construction, the parts are pre-notched for accurate and strong<br />
assembly. Wing stiffened with 3mm carbon rod. Carbon rod material<br />
for elevator and rudder pushrods included. Assembly takes only an<br />
hour or two using foam friendly CA and a small amount of Epoxy. Light<br />
enough for indoor flying but still has the strength and stability<br />
necessary for outdoor flying. Fully 3D capable with the power system<br />
that we recommend. Controls are Aileron, Elevator, Rudder, and<br />
Throttle.<br />
Big 3D EPP foam airplane<br />
Radio ______________<br />
SPM5500 Spektrum DX5e Full<br />
Range Transmitter ............. $99.99<br />
Five-HTS056 Hitec HS-56HB Sub<br />
Micro BB Servo @ $24.99 ea.<br />
........................................... $124.95<br />
Motor, Spinner _______<br />
POTM200 Potensky POT 200 W<br />
OUTRUNNER Brushless Motor<br />
w/Spinner ......................... $84.99<br />
Prop ______________<br />
P11038 APC 11x3.8 Prop ... $2.90<br />
Motor Controller _______<br />
JAP18 Jeti ADVANCE Pro 18 Amp<br />
Brushless Controller ....... $66.99<br />
Battery _____________<br />
TP21003SPL2 3-Cell 11.1V 2100mAh<br />
“Pro Lite V2” 20C ............ $47.99<br />
Charger ___________<br />
ETC2500 Li-Poly Smart Charger<br />
for 1-4 Cells ..................... $48.99<br />
BAT220 Charger Adapter - JST<br />
to Deans Ultra ................... $4.99<br />
POT201 Potensky “Uzi XXL” ............................................... $199.99<br />
39" wingspan, 40-1/2" long, 698 sq. in. wing area, 25 oz. flying weight.<br />
Nearly 5 sq. ft. of wing area, with a wing loading just over 5 oz. per.<br />
sq. ft. Control surfaces are pre-hinged. The rounded leading edges for<br />
all flying surfaces are pre-cut. The airplane will slow to a walking pace<br />
or open the throttle and fly straight up. Carbon rods stiffen the structure.<br />
EPP foam is very durable. This makes a great combination for 3D flight.<br />
Build in a couple evenings. Good illustrated instructions. For 4 channels:<br />
Ailerons, Elevator, Rudder and Throttle.<br />
www.hobby-lobby.com • Order Online 24/7 35