2 - ClamSITel

Lipoly Charger for 1-3 cells
ETC2020 Smart Charger
for 1-3 Li-Poly Cells ........................... $33.99
3-3/4 x 1-7/8 x 1/2". Charges 1-3 Lithium cells at
a charge rate from 110mA to 1200mA. Use
jumper connections to select the number of cells
to be charged and the charge rate. If you select
the wrong number of cells or hook the battery up backwards, the charger’s
red LED will blink repeatedly and it will not start the charge.
Charging process is automatic and a green LED indicates completion. A
JST Female connector for connecting the battery to be charged is
included.
Charges 1-3 Lipoly Cells and 1-8
Ni-Cad/NiMH Cells
ETC2030 Smart Charger for
1-3 Li-Poly or 1-8 NiCd/NiMH Cells .. $39.99
3-3/4 x 1-7/8 x 1/2". Charges 1-3 Lithium cells
or 1-8 Ni-Cad/NiMh cells at a charge rate from
110mA to 1200mA. Use jumper connections to select the number of
cells to be charged and the charge rate. If you select the wrong number
of cells or hook the battery up backwards, the charger’s red LED
will blink repeatedly and it will not start the charge. Charging process
is automatic and a green LED indicates completion. A JST Female
connector for connecting the battery to be charged is included.
Charge 1-5 LiPoly cells at
up to 3-1/2 amps
ETC2700 AnyRC Li-Poly Smart
Charger, 1-5 Cells ............... $49.99
4" x 1-3/4" x 3/4". Charges 1-5
lithium cells at rates up to 3.5 amps.
Push button operation allows you to
easily set the cell count and charge
rate. LED's indicate cell count,
charge rate, and charging status. Audible beeps and solid LED light
indicate that charging is complete. Reverse polarity protection (input
and output). Connects to a 12-volt battery or power supply with the
included alligator clips. Banana plugs with a JST charge connector are
included. Rugged aluminum case with good cooling for trouble free
operation.
Charge 1 to 4 LiPoly cells at
up to 2-1/2 amps
TPC425 1-4 Cell LiPoly
Charger .......................... $49.99
4” x 1-3/4” x 5/8”. Charges 1-4 lithium
cells at rates up to 2.5 Amps. Push button
operation allows you to easily set the cell
count and charge rate. LED’s indicate cell
count, charge rate and charging status.
Audible beeps and a solid LED light indicate
that charging is complete. Reverse polarity protection (input and
output). Connects to a 12 volt battery or power supply. Banana plugs
with JST charge connector included.
Easy to use automatic Lithium Polymer charger for
1-4 cell packs-charges at up to 3 amps
GR6437 Graupner "LiPo-Charger 4"
Automatic 1-4 Cell Charger ... $29.99
3-1/2" x 2" x 7/8". Fully automatic charger
for Lithium Polymer battery packs with
1 to 4 cells. Connect to your auto battery
or a 12V power supply. Automatically
detects the number of cells with 1 to 3
cell packs, 4 cell packs must be manually
set by push button. Charger auto
detects the cell capacity and sets the
charge current; the charge is monitored
continuously through the charging
process and the optimum charge rate maintained. LED's indicate
charge status, blinking LED and audible beep indicates completion of
charge. Maximum charge rate is 3 amps. Charger has safety protection
for reversed polarity (input or output), low input voltage, incorrect cell
count and incorrect cell type (eg. Ni-Cd/NiMh).
Lithium Chargers
Charges 1 to 5 Lithium cells, or 1 to 12
NiCad/NiMH cells at up to 5 amps
GR6412 Graupner Ultramat 12
Automatic Charger ................... $124.99
5-1/8" x 4-1/2" x 1-1/2". Micro-processor
controlled fast charger, discharger and
battery conditioner for Nicad, NiMH,
Lithium Polymer, Lithium Ion, and Lead
Acid batteries. Connects to any 12-volt
power supply. Clear instructions explain
the specific programs for charging each type of battery. Cut-off for
Nicad and NiMH cells is by "Delta Peak" method. Lithium Polymer and
Lithium Ion charging program uses the constant current/constant voltage
method. Warnings for incorrect polarity, low input voltage, incorrect
cell count and over time limit are shown on the display screen. Battery
conditioning of Nicad and NiMH cells through repeated charge/discharge
cycles is programmable for up to 5 cycles. Charges at up to 5
amps and discharges at up to 1 amp.
Charges up to 30 Nicads
(at rates up to 7Ah), up to 30 NiMH batteries,
up to 10 Lithium Cells, up to 24V Lead-acid
GR6416 Graupner Ultra Duo Plus 30
Automatic Charger .............. $229.99
The ultimate field charger. 6”x5-3/8”
1-5/8”, 26 oz. Recharges, conditions,
balances, measures capacity of
Nicads. Recharges, discharges to
measure capacity of NiMH batteries.
Charges, discharges to determine
capacity of Lithium cells and Lead Acid batteries. Clear instructions,
relatively easy to set. Can be adjusted to accept low car (input) battery
voltage. For knowledgeable users this charger allows changing of
Delta V for automatic cutoff, trickle current. Has adjustable safety
timer, click sound when buttons are successfully pressed, buzzer
sound for errors and completions. Allows separate charging of receiver
or transmitter batteries.
NEW! Multi purpose balance charger - charges LiPo/LiIon,
NiCd/NiMH and Pb batteries
SRC505 iC5 LiPlus Intelligent Digital
Balance Charger ..................... $64.99
5-5/8" x 3-3/8" x 1-3/8". Multi use charger
for 1-5 LiIon/LiPo cells, 1-14 NiCd/NiMH
cells, Pb 2-12V. Includes adapters for
"Deans style" plugs, JST, Rx pack, glow
plug lighter, and alligator clips. Balance
plugs on end of unit are JST-XH type and compatible
with many Asian battery packs. NOTE: When
balance charging Lithium batteries, both the balance
tap and the main power wires must be connected
to the charger.
Unit includes:
Internal independent lithium battery balancer
Employs an individual-cell-voltage balancer to maintain your pack in
balance while charging. Balance individual cells during discharge
During the discharge process, iC5 can monitor and balance each cell
of the pack individually. An error message will sound and the process
will be ended automatically if the voltage of any single cell is abnormal.
Fast and Storage mode charging
"Fast" charge will fully charge a lipoly battery in the shortest time.
"Store" setting will charge the battery at approximately a 50% charge
for long term storage. This prolongs the useful life of the battery.
Charges various types of LiPoly cells
Includes charging programs for Li-Ion and LiPo battery types.
www.hobby-lobby.com • Order Online 24/7 75