2 - ClamSITel
2 - ClamSITel
2 - ClamSITel
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tools<br />
For electrical and plastic cutting<br />
MT3610 5" Carbon Steel Side Cutters<br />
............................................................ $4.99<br />
Light duty cutters with rubber grips for electrical<br />
wiring. Ideal for cutting servo leads and electrical<br />
wires on motors and speed controls. Also<br />
great for cleanly cutting plastic parts off of a<br />
parts tree. Not made for cutting music wire.<br />
Heavy duty pliers make<br />
clean cuts<br />
MT3611 5" Heavy Duty Wire Cutter Pliers<br />
............................................................ $7.99<br />
Cuts music wire up to 5/64" with ease. Great<br />
for cutting pushrods without leaving sharp<br />
ends. Cuts are square ended and much easier<br />
to make than with side cutters.<br />
Comfortable rubber grips.<br />
Special scissors for ABS plastic<br />
MT3527 Curved Canopy<br />
Trim Scissors ................ $8.99<br />
5-1/2" long, extremely sharp, with<br />
slightly curved blade. Expressly for<br />
cutting thin plastic canopies, wheel<br />
pants, cowls, vacuformed styrene<br />
parts, etc.<br />
Machined tempered steel<br />
shafts<br />
for a solid no strip fit<br />
MT3415 Aluminum Handle Metric<br />
Hex Driver Set, 4 ................ $23.99<br />
5-3/8" long with color-coded knurled<br />
handles. Metric sizes 1.5mm, 2mm,<br />
2.5mm, 3mm.<br />
Ideal for the flying field - fits<br />
in your pocket<br />
MTH3440 "All-in-One" Metric Hex<br />
Driver Set ................................. $24.99<br />
3-5/8" long x 3/4" dia. handle with 4 metric<br />
hex wrenches inside. The handle is<br />
carbon fiber tube with anodized aluminum<br />
ends. Handle contains 1.5mm, 2mm, 2.5mm, and 3mm hex<br />
wrenches machined from 3.5mm hardened steel shafts. Assembled<br />
length is 6-1/8". Light and easy to carry, great for the field box.<br />
A must for every<br />
helicopter pilot<br />
MT3605 Curved Ball Link<br />
Pliers ........................................... $17.99<br />
Makes installing, removing and adjusting<br />
ball links very easy.<br />
NEW! 24 hardened tips---Slot, Phillips,<br />
Metric Hex, Torx<br />
MT3493 Precision All Purpose Driver Set ............................ $29.99<br />
13 double-ended drivers with hardened tips and<br />
a cushion grip quick-change ratcheting handle.<br />
Set includes 4-slotted screwdrivers, 1.5mm,<br />
2.0mm, 3.0mm, and 4.0mm widths. 6-Phillips<br />
screwdrivers, PH.000, PH.00, PH.0, PH.1, PZ.0,<br />
PZ.1 sizes. 6-Metric Hex drivers, 1.5mm,<br />
2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm. 8-Torx<br />
drivers, T5, T6, T7, T8, T9, T10, T15, T20. Each<br />
driver fits the ratcheting handle and can be adjusted to an overall length<br />
of 6-1/2” to 10-1/2”, giving you the flexibility to perform nearly any job.<br />
Entire set comes in a sturdy 5”x7”x1” hard plastic organizer case.<br />
High quality precision tools for all<br />
modelers<br />
MT3609 6" Long Nose Pliers w/Spring<br />
Handle ................................................. $10.99<br />
Top quality tool-steel pliers precision ground to a fine point for reaching<br />
into small spaces. Serrated jaws hold small parts securely.<br />
Metric Hex Drivers with long shank and comfort grip<br />
make removing hex screws easy<br />
MT3475 4 pc. Metric Hex Driver Set .......... $10.99<br />
6-7/8" long metric hex drivers. Great for removing<br />
stubborn metric hex head screws. Precision<br />
machined from hardened steel for perfect fit. Tip<br />
sizes are 1.5mm, 2.0mm, 2.5mm and 3.0mm.<br />
Metric nut drivers with long<br />
shank make easy work of<br />
loosening nuts<br />
MT3480 Metric Nut Drivers: 8mm,<br />
7mm, 5.5mm, 4mm, 4 pcs. .......... $10.99<br />
6-7/8" long metric nut drivers. Great for working on helicopter blade<br />
grips and locking nuts.<br />
Cut 1mm to 14mm dia. holes<br />
in wood, fiberglass or plastic<br />
MT3417 Super Reamer, 14mm .. $18.99<br />
Hardened steel Super Reamer easily drills<br />
holes in plastic canopies and fiberglass<br />
cowls without tearing the material like a drill bit does. Has a carbon<br />
fiber handle and an aluminum cap to protect the tip while not in use.<br />
NEW! Color-coded 9 piece Metric nut drivers in<br />
zipper case<br />
MT3492 Metric Nut Driver Set w/Case ............................. $29.99<br />
8 individual color coded metric drivers; 3.0mm,<br />
3.5mm, 4.0mm, 4.5mm,5.0mm, 5.5mm, 6.0mm,<br />
7.0mm. Each driver inserts into the<br />
driver handle and can be adjusted from a total<br />
length of 6-1/2” to 10-1/2” for those hard to reach<br />
nuts. Driver automatically locks at any length<br />
that you choose. The handle has a built in ratchet<br />
for clockwise/counterclockwise operation, or it<br />
can be locked for standard use. All the parts come organized for easy<br />
transport in a 4”x7”x1-1/4” zippered case.<br />
Velcro for holding batteries,<br />
hatches in place<br />
VEL001 6” Velcro, Black .................... $2.39<br />
Ever wished you had an extra hand<br />
PVS100 "Hip Clip" Hands-Free Radio Holster ..................... $14.99<br />
3-3/4" x 2" x 1/2", weighs about an<br />
ounce. Constructed of black leather<br />
with a Velcro catch on one side and a<br />
belt clip on the other. Makes it easy to<br />
carry your transmitter on your belt<br />
while carrying your plane and toolbox<br />
out to the flight-line. Easily remove<br />
your radio from the "Hip Clip" with one<br />
hand. Rugged design for years of trouble-free<br />
use.<br />
www.hobby-lobby.com • Order Online 24/7 95
Change language