12.03.2015 Views

FortiGate Administration Guide - FirewallShop.com

FortiGate Administration Guide - FirewallShop.com

FortiGate Administration Guide - FirewallShop.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

FortiWiFi-60 System wireless settings<br />

System Wireless<br />

RTS Threshold The Request to Send (RTS) threshold sets the time the unit waits for<br />

Clear to Send (CTS) acknowledgement from another wireless device.<br />

Fragmentation<br />

Threshold<br />

7 Select OK.<br />

Set the maximum size of a data packet before it is broken into two or<br />

more packets. Reducing the threshold can improve performance in<br />

environments that have high interference.<br />

FortiWiFi-60 System wireless settings<br />

Go to System > Wireless > Settings to configure wireless settings.<br />

Figure 64: Configuring wireless parameters<br />

MAC Address The MAC address of the Wireless interface.<br />

Operation Mode The current operating mode. Select Change to change it.<br />

Access Point mode makes the FortiWiFi unit act as a wireless access<br />

point to which multiple clients can connect.<br />

Client mode configures the unit to connect to another wireless network<br />

as a client.<br />

Geography Select your country or region. This determines which channels are<br />

available. You can select Americas, EMEA, Israel, or Japan. If you are in<br />

any other region, select World.<br />

Channel Select a channel for your FortiWiFi wireless network. Clients of the<br />

wireless network must configure their <strong>com</strong>puters to use this channel.<br />

The channels that you can select depend on the Geography setting. See<br />

“Channel assignments” on page 118 for channel information.<br />

SSID<br />

Enter the wireless service set identifier (SSID) or network name for the<br />

FortiWiFi-60 unit. Clients who want to use the wireless network must<br />

configure their <strong>com</strong>puters to connect to the network that broadcasts this<br />

network name.<br />

SSID Broadcast Select Enable if you want the FortiWiFi-60 unit to broadcast the SSID.<br />

Broadcasting the SSID makes it possible for clients to connect to your<br />

wireless network without first knowing the SSID.<br />

Security mode To use WEP, select WEP64 or WEP128. To use WPA (available in<br />

Access Point mode only), select WPA Pre-shared Key or WPA_Radius.<br />

Clients of the FortiWiFi wireless network must configure their <strong>com</strong>puters<br />

with the same settings.<br />

<strong>FortiGate</strong> Version 3.0 MR5 <strong>Administration</strong> <strong>Guide</strong><br />

124 01-30005-0203-20070830

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!