FortiGate Administration Guide - FirewallShop.com

Settings
System Administrators
Web Administration Ports
HTTP
HTTPS
Telnet Port
SSH Port
Enable v1
compatibility
Timeout Settings
Idle Timeout
Display Settings
Language
Enter the TCP port to be used for administrative HTTP
access. The default is 80.
Enter the TCP port to be used for administrative HTTPS
access. The default is 443.
Enter the telnet port to be used for administrative access.
The default is 23.
Enter the SSH port to be used for administrative access.
The default is 22.
Select to enable compatibility with SSH v1 in addition to
v2. (Optional)
Enter the number of minutes that an administrative
connection can be idle before the administrator must log
in again. The maximum is 480 minutes (8 hours). To
improve security, keep the idle timeout at the default
value of 5 minutes.
Select a language for the web-based manager to use.
Choose from English, Simplified Chinese, Traditional
Chinese, Japanese, Korean, or French.
You should select the language that the management
computer operating system uses.
Lines per Page Set the number of lines per page to display in table lists.
The default is 50. Range is from 20 - 1000.
LCD Panel (LCD-equipped models only)
Enable SCP
PIN Protection
Select the PIN Protection check box and type a 6-digit
PIN.
Administrators must enter the PIN to use the control
buttons and LCD.
Enable if you want users logged in through the SSH to be
able to use the SCP to copy the configuration file.
Note: If you make a change to the default port number for http, https, telnet, or SSH,
ensure that the port number is unique.
FortiGate Version 3.0 MR5 Administration Guide
176 01-30005-0203-20070830