FortiGate Administration Guide - FirewallShop.com

Maintenance System Configuration
System Maintenance
Firmware Upgrade
Firmware upgrade displays your options for upgrading to a new version using the
FortiGuard network if that option is available to you. It is not available on all
models, and you must register for the service through customer support.
Figure 106:Firmware Upgrade
Upgrade method
[Please Select]
Allow firmware
downgrade
Upgrade by File
OK
Select to upgrade from FortiGuard network or upgrade by file
Select one of the available firmware versions.
Select to be able to install older versions than the one currently
installed.
This is useful if the current version changed functionality you need
and you have to revert to the old image.
Select Browse to select a file on your local PC to upload to the
FortiGate unit
Select OK to enable your selection.
Advanced
The advanced section includes the USB Auto Install feature, importing CLI
commands, and the debug log.
Figure 107:Advanced
Advanced (USB Auto-Install)
On system restart,
automatically update
FortiGate configuration
This section is available only if a USB disk is connected
to the FortiGate unit. Select the options as required and
restart the FortiGate unit.
If you select both configuration and firmware update,
both occur on the same reboot. The FortiGate unit will
not reload a firmware or configuration file that is already
loaded.
Automatically update the configuration on restart. Ensure
that the Default configuration file name matches the
configuration file name on the USB disk.
FortiGate Version 3.0 MR5 Administration Guide
184 01-30005-0203-20070830