FortiGate Administration Guide - FirewallShop.com

Reports
Log&Report
To change the graphical information
1 Go to Log&Report > Report Access > Memory.
2 Select the time period to include in the graph from the Time Period list.
3 Deselect the services to not include in the graph. All services are selected by
default.
4 Select Apply.
The graph refreshes and displays with the content you specified in the above
procedure. The Top Protocols Ordered by Total Volume graph does not change.
FortiAnalyzer reports
Note: If you require a more specific and detailed report, configure a report from the
FortiAnalyzer web-based manager or CLI. See “Configuring a FortiAnalyzer report” on
page 496 if you require a simple FortiAnalyzer report. The FortiAnalyzer unit can generate
over 140 different reports providing you with more options than the FortiGate unit provides.
You can configure a simple FortiAnalyzer report from FortiGate logs in the
web-based manager or CLI. If you want to configure a report using the CLI
interface, see the FortiGate CLI Reference for more information.
See the FortiAnalyzer Administration Guide for details on how to add and
configure additional report profiles.
Note: FortiAnalyzer reports do not appear if the FortiGate unit is not connected to a
FortiAnalyzer unit, or if the FortiAnalyzer unit is not running firmware 3.0 or higher.
Configuring a FortiAnalyzer report
You can configure a FortiAnalyzer report from the Report Config menu. The
Report Config menu also includes the CLI command, multi-report, enabling
you to configure multiple FortiAnalyzer reports. The multi-report command is
disabled by default.
By default, only the default FortiAnalyzer report is available in the Report Config
menu. The default FortiAnalyzer report is automatically configured by the
FortiAnalyzer unit and is specific to your FortiGate unit. The report is also given a
default name, for example, Default_100281021024. The default report name is
taken from the FortiGate unit identification number.
You can edit either scheduled reports or the default FortiAnalyzer report. See
“Editing FortiAnalyzer reports” on page 504 to edit a scheduled report or the
default FortiAnalyzer report.
To configure the FortiAnalyzer report profile
1 Log into the CLI.
2 Enter the following commands:
config log fortianalyzer settings
set multi-report enable
end
3 Log into the web-based manager.
4 Go to Log&Report > Report Config.
5 Enter a name for the report.
FortiGate Version 3.0 MR5 Administration Guide
496 01-30005-0203-20070830