FortiGate Administration Guide - FirewallShop.com

Reports
Log&Report
Time Period
From Date
To Date
Select the time period for the report. When you select last n hours,
days or weeks, a field will appear. Enter a number in the field, for
example, eight, for last n of hours, days of weeks.
Select to configure the start date of the report. For example, you
may want to begin the report on May 5, 2005 at 13:00. The hours
are in the 24-hour format.
Select to configure the end date of the report.
Figure 338:Report configuration data log filter
Filter logs
Include logs that
match
Priority
Source(s)
Select None to not apply a filter to the logs in the report.
Select Custom to apply filters to the log report.
Select the matching criteria for the filter.
Select all to include logs in the report that match all filter settings.
If information within a log does not match all the criteria, the
FortiAnalyzer unit will not include the log in the report.
Select any to include logs in the report that match any of the filter
settings. If any of the filter content, even one filter setting, matches
information in a log file, the log the FortiAnalyzer unit includes the
log in the report.
Select the check box to enable the priority level filter options.
Set the priority level to look for in the logs, and set whether the
information should be less than, greater than or equal to the
priority level.
Enter the source IP address for the matching criteria. Use a
comma to separate multiple sources.
Select Not to exclude the source IP address from the report. For
example, do not include any information from a specific source IP
address in the log report.
FortiGate Version 3.0 MR5 Administration Guide
498 01-30005-0203-20070830