FortiGate Administration Guide - FirewallShop.com

System Status
Viewing Statistics
Viewing Statistics
Viewing the session list
The System Status Statistics provide information about sessions, content
archiving and network protection activity.
The session list displays information about the current communications sessions
on the FortiGate unit.
To view the session list
1 Go to System > Status.
2 In the Statistics section, select Details on the Sessions line.
Figure 26: Session list
Virtual Domain Select a virtual domain to list the sessions being processed by that
virtual domain. Select All to view sessions being processed by all virtual
domains.
This is only available if multiple virtual domains are enabled.
Refresh Update the session list.
Page up View previous page in the session list.
Page down View the next page in the session list.
Line
Clear All Filters
Filter Icon
Enter the line number of the session to start the displayed session list.
For example if there are 5 sessions and you enter 3, only the sessions
numbered 3, 4 and 5 will be displayed.
The number following the ‘/’ is the number of active sessions on the
FortiGate unit.
Select to reset any display filters that may have been set.
The icon at the top of all columns except #, and Expiry. When selected it
brings up the Edit Filter dialog allowing you to set the display filters by
column. See “Adding filters to web-based manager lists” on page 43.
Protocol The service protocol of the connection, for example, udp, tcp, or icmp.
Source Address The source IP address of the connection.
Source Port The source port of the connection.
Destination The destination IP address of the connection.
Address
Destination Port The destination port of the connection.
Policy ID The number of the firewall policy allowing this session or blank if the
session involves only one FortiGate interface (admin session, for
example).
Expiry (sec) The time, in seconds, before the connection expires.
Delete icon Stop an active communication session. Your access profile must include
read and write access to System Configuration.
FortiGate Version 3.0 MR5 Administration Guide
01-30005-0203-20070830 63