FortiGate Administration Guide - FirewallShop.com

Viewing the IP pool list
Firewall Virtual IP
Scenario 3: The number of source addresses is fewer than that of IP pool
addresses
In this case, some of the IP pool addresses will used and the rest of them will not
be used.
Original address
Change to
192.168.1.1 172.16.30.10
192.168.1.2 172.16.30.11
192.168.1.3 172.16.30.12
No more source addresses 172.16.30.13 and other
addresses will not be used
Viewing the IP pool list
If virtual domains are enabled on the FortiGate unit, IP pools are created
separately for each virtual domain. To access IP pools, select a virtual domain
from the list on the main menu. IP pools are not available in Transparent mode.
To view the IP pool list go to Firewall > Virtual IP > IP Pool.
Figure 208:IP pool list
The IP pool list has the following icons and features:
Create New
Name
Start IP
End IP
Delete icon
Edit icon
Select to add an IP pool.
The name of the IP pool.
The start IP defines the start of an address range.
The end IP defines the end of an address range.
Select to remove the entry from the list. The Delete icon only appears if
the IP pool is not being used in a firewall policy.
Select to edit the following information: Name, Interface, IP
Range/Subnet.
FortiGate Version 3.0 MR5 Administration Guide
326 01-30005-0203-20070830