FortiGate Administration Guide - FirewallShop.com

Viewing switch VLANs
Switch (FortiGate-224B only)
Configuring a switch VLAN
Go to Switch > Port > VLAN and select Create New to create a new switch
VLAN. You can also modify an existing VLAN by selecting its Edit icon.
Figure 120:Creating a new VLAN
Name
VLAN ID
Enter a name for this VLAN.
Enter the VLAN ID for this switch VLAN. Do not use any
of the reserved VLAN IDs. By default, VLAN IDs 4020
through 4044 are reserved.
Enable Spanning Tree Protocol Enable Spanning Tree Protocol (STP). You select the
type of STP in Switch > Protocols > Spanning-Tree.
Virtual Interface
Enable or disable having a virtual address for this port.
Virtual IP/Netmask
Available Ports
Member Ports
Administrative Access
If you enable Virtual Interface, enter the Virtual IP
address and netmask.
A list of the switch ports that do not already belong to a
VLAN. To add a port to the Member Ports list, select it
and then select the right-pointing arrow button.
A list of the switch ports that belong to this VLAN.
To remove a port from the list, select it and then select
the left-pointing arrow button.
Select the types of administrative access permitted on
this port. Ping access enables response to ping
requests for testing.
FortiGate Version 3.0 MR5 Administration Guide
212 01-30005-0203-20070830