SECTION B - Derry City Council
SECTION B - Derry City Council
SECTION B - Derry City Council
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
290 SURPLUS MATERIAL<br />
o General: Remove subsoil, stones, debris, wrapping material, canes, ties,<br />
temporary labelling, prunings and other arisings/ rubbish.<br />
PREPARATION OF PLANTING BEDS/ PLANTING MATERIALS<br />
300 HERBICIDE<br />
o Locations: All planted areas.<br />
o Type: Suitable for suppressing perennial weed<br />
o Timing: Allow fallow period before cultivation.<br />
o Duration: (minimum): As manufacturers recommendations.<br />
335 GENERAL FERTILIZER<br />
o Locations: All areas to be planted.<br />
o Manufacturer: As approved by CA.<br />
o Product reference: As approved by CA.<br />
o Application: Spread evenly.<br />
o Timing: Immediately before cultivation.<br />
o Coverage: Evenly over all areas to be planted at 30g/sq m.<br />
375 CULTIVATION<br />
o Compacted topsoil: Break up to full depth.<br />
o Cultivation: Loosen, aerate and break up soil into particles of 2-8 mm.<br />
o Depth: Top 350mm of planting beds.<br />
o Timing: Within a few days before planting.<br />
o Weather and ground conditions: Suitably dry.<br />
o Surface: Leave regular and even.<br />
o As required in sections D20 and Q28.<br />
o Levels: Within 50mm of levels specified on drawings.<br />
o Undesirable material brought to the surface: Remove, including weeds, roots,<br />
stones and clods larger than 20 mm in any dimension, tufts of grass and foreign<br />
matter.<br />
o Soil within root spread of trees and shrubs to be retained: Do not dig or<br />
cultivate.<br />
o<br />
385 MULCH MATTING/GEOTEXTILE FABRIC<br />
o Manufacturer: Mypex. Product reference – Mypex Ground Cover – or similar<br />
approved<br />
o Timing: Lay after cultivating and before planting<br />
o Watering: Water soil thoroughly before laying.<br />
o Laying: In close contact with soil surface. Lap or butt joints as recommended<br />
by Manufacturer, with no gaps<br />
47