AvaRaman Operating manual AvaSoft Raman 7.3 November 2008

Print button
By clicking the Print button a graph that is displayed on the monitor will be printed. The same
result can be achieved with the option File-Print.
Channel button
After clicking this button, a dialog is shown in which the channels to be displayed can be selected.
Since current Raman Systems are available with only one Master channel, this option can be used
only to switch the online Master spectra off. Switching off may be helpful if you want to display only
graphs that were saved before (File-Display Saved Graph), without the online measured data for the
Master channel.. The same result can be achieved with the option View-Channel.
Autoscale Y-axis button
By clicking this button, the graph will be rescaled on-line. A maximum signal will be shown at about
75% of the vertical scale. The same result can be achieved with the option View-Autoscale Y-axis
Change Graph Scale button
By clicking this button, a dialog will be shown in which the range can be changed for both X- and Y-
axis. This range can be saved as well and restored any time by clicking the Goto Preset Scale button
(see below). The menu option with the same functionality is View-Change Graph Scale.
Goto Preset Scale button
By clicking this button, the scale for X- and Y-axis will be set to a range that has been set before.
The same result can be achieved with the menu option View-Goto Preset Scale
Graphic Reset button
By clicking this button, the X- and Y-axis will be reset to their default values. . The same result can
be achieved with the option View-Graphic Reset
H.C.F. button
The History Channel Function button allows you to switch directly to the history channel function
screen to start measuring immediately. Of course first the functions need to be defined.
20 AvaRAMAN manual.doc Nov-08
Avantes www.avantes.com info@avantes.com