AvaRaman Operating manual AvaSoft Raman 7.3 November 2008

E5-E*** : Raman Shift scale (in cm -1 ) for second History Channel spectrum
(empty if spectrum is not selected)
F3 : Value for second History Channel
F5-F*** : Spectrum for second History Channel
(empty if spectrum is not selected)
etc.
*** : depends on the wavelength range selected.
2.3.5.4 Start Output
You start the output the usual way, with ‘Application’,
‘History’, ‘Start measuring’.
You can also use the corresponding button on the Button Bar.
Please do not perform large alterations of the worksheet, while
data is being transmitted. An error ‘Call was rejected by callee’
will be issued if Excel is too busy.
Moving around the worksheet should not pose any problems.
Save any alterations to your worksheet before starting the transfer to Excel. You do not have to
close the worksheet or close Excel.
2.3.5.5 Stop Output
If you want to stop the transfer to Excel give focus to AvaSoft and press ‘Exit’. It may take a few
seconds before the buttons appear.
Excel will not be closed by AvaSoft. Save your work and close Excel the same way you would when
working with Excel manually.
We have included a sample worksheet, called ‘Continuous.xls’, which demonstrates linking to the
‘AvaSoft Data’ sheet. In this case, two graphs are drawn from the Excel columns C/D and E/F. The
graph and data are continuously updated while data is being transferred to Excel.
Nov-08 AvaRAMAN manual.doc 59
Avantes www.avantes.com info@avantes.com