AvaRaman Operating manual AvaSoft Raman 7.3 November 2008
AvaRaman Operating manual AvaSoft Raman 7.3 November 2008
AvaRaman Operating manual AvaSoft Raman 7.3 November 2008
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.3.3.8 View Menu: Invert X-Axis<br />
Default, the spectral data are shown versus <strong>Raman</strong> Shift in cm -1 , increasing from left to right. After<br />
the menu option ‘Invert X-axis’ is clicked, the X-axis is inverted (increasing from right to left) and a<br />
checkmark appears in front of the menu option. To return to default mode, the menu option needs<br />
to be clicked again.<br />
2.3.3.9 View Menu: Grid Enable<br />
This option, if preceded by a checkmark, shows a grid in the graphical region, as shown in the figure<br />
at the right. By default this option is OFF. After clicking the menu option it will be enabled<br />
(preceded by a checkmark).<br />
2.3.3.10 View Menu: Progress Bar Enable<br />
If using long integration times or a high number of averages, it can take a few or more seconds<br />
before a new scan is received by the application. To get an indication about how much time it will<br />
take until the next scan arrives, a progress bar can be displayed as shown in the figure above. After<br />
enabling the progress bar by clicking the menu option, it will be displayed after the next scan has<br />
arrived. The progress bar will be shown only if the time between scans is more than one second.<br />
The time between scans is roughly the integration time, multiplied with the number of averages.<br />
However, if the number of averages is high, the time between scans can get longer because of the<br />
overhead time that is spent on transmitting the high number of average spectra to the PC.<br />
Nov-08 AvaRAMAN <strong>manual</strong>.doc 45<br />
Avantes www.avantes.com info@avantes.com
Change language