Swift Owner's Handbook - Swift Group

Fault FindingWATERProblemWater not flowing fromany tap when operatedbut pump runsPossible CauseFreshwater tank emptyPump wired in reversePump not primedPipe inlet or outlet pipe disconnectedPump pipes restricted by kinkingBlockage in pump inlet or outlet pipeBlocked in-line filter of pump filterAir leak in suction line to pumpRemedyCheckCheck wiring, refer to pump manufacturers instructionsRefer to pump manufacturers instructionsCheck connectionsCheck pipes runCheck, starting inside freshwater tankDismantle and cleanCheck for bubbles & secure with clipPump does not run Pump or tap incorrectly wired Refer to pump/tap manufacturers instructionsPump fuse blownCheck wiring connection and then replace with fuse of correct ratingBattery disconnectedCheck connectionsPump seized or overheatedRefer to pump manufacturers servicing instructionsPressure pump sensing switch may have failedRefer to pump manufacturers servicing instructionsContacts may be faultyCheck contacts in plug and socket are clean and making contactWiring connections may be faultyCheck wiring connectionsOn switched tap version, microswitch could be faulty Disconnect wires from microswitch and join together. If the pumpoperates, microswitch should be replacedWater flows from cold tapbut not from hotFeed pipe to water heater incorrectly connected tothe heater outletBlockage in hot pipelineHeater inlet or outlet pipes kinked preventing flowHot tap not connectedHot tap failed or blockedHeater non-return valve jammedRefer to installation instructionsDisconnect pipes and inspectCheck and re-route if necessary. Ensure that hose is Carverrecommended typeRefer to installation manualDisconnect and inspectSeek service attention102