Swift Owner's Handbook - Swift Group

Fitted EquipmentCASSETTE C-200 CW AND C-200 CEThe toilet section of the C-200 includes arotatable bowl, removable seat and cover, aconsole with a flush handle/flush buttons, abuilt in flush-watertank and a waste levelwarning indicator. Underneath the bowl, thevalve blade handle is located.PREPARING FOR USE1. Open access door pull retaining clipupwards (fig. 1).2. Remove holding tank by pulling straightout. When holding tank hits the stop, tiltfront end downwards slightly and remove(fig. 2).3. Position tank vertically and swivel pouroutspout upwards (fig. 3).4. Remove the cap of the pour-out spout.Add required quantity of toilet fluidthrough pour-out spout then add approx.2 litres of water through the spout tocover holding tank bottom. Replace capand return pour-out spout to its originalstored position (fig. 4).Note: Warmer weather or longerintervals between emptying the wastetank may require additional toilet fluid.Use only Thetford toilet fluid to achievethe best results.Caution: Never add toilet fluid directlyinto toilet bowl.5. Slide the holding tank into positionthrough access door (fig. 5).6. Make sure the holding tank is secured bythe retaining clip. (fig. 6).7. Open the waterfill door and add 50 ml ofAqua Rinse. Aqua Rinse results in abetter flush and improves the hygiene ofthe toilet. Then fill the watertank withfresh water using a jerrycan or a hose.Tank capacity is 7 litres (fig. 7).OPERATION8. Turn the bowl in the most comfortableposition (fig. 8)9. C-200 CW only: Before using the toilet itis recommended to flush some waterinto the bowl by lifting and pressing downthe flush handle (fig. 9).9a.C-200 CE only: Before using the toilet itis recommended to flush some water intothe bowl by pressing and releasing theflush button (fig. 9a).1 23 45 67 899a75