Swift Owner's Handbook - Swift Group

Auto = Automatic Filling system active.Off = Off.Man = Manual Override, in this position theExternal pump will be on and will stay onuntil the switch is moved to the Off or Autopositions.Charger switchWhen the caravan battery requires charging,press this switch to the on position (it shouldthen illuminate). Also ensure the SelectorSwitch is in the van position.Heater switch (GC only)This switch energises the Carver waterheater. When switched to the on position,the green indicator marked heater on shouldilluminate.Heating and WaterSee Primus Aquaflex instructions. (Page 63)Fuse ModuleEight fuses are provided in this module toprotect all dc circuits, the fuse allocation isshown below. Fuses must be replaced onlywith the specified values.Fuse 1 - Front roof lightingFuse 2 - Rear roof lightingFuse 3 - FanmasterFuse 4 - RadioFuse 5 - 12v sockets/Hitchlight/TV ampFuse 6 - Fan circuitsFuse 7 - Water pumps/Water sensorFuse 8 - IgnitionsSPECIFICATIONMains Input 230 volts +15%,-20% ~ acFrequency 50HzOutput voltage 13.8 volts DCOutput curren 12 amps (max)BatteryrecommendedDimensionsHeightWidthDepthWeightRe-chargeable lead-acid12 volt battery, 6 cells,leisure type. 60 amperehoursminimum444mm102mm230mm (max)3.2KgProduct SupportPlug-In-Systems Ltd offer the customer anOn-Site Service, available for both Warrantyand Non-Warranty repairs (on the CEC andPlug-In-Systems range of equipment only).If you would like to take advantage of thisservice then please ring Plug-In-Systems(direct) on:HULL (01482) 659309and ask for PRODUCT SUPPORTESM2ElectricsESM 2 ELECTRICAL SUPPLYMODULEThe ESM 2 Electrical Supply Module fromPlug-In-Systems Ltd is a 240V mains and12V DC power supply unit, providing all thenecessary features for supply of electric inyour caravan. The unit provides the followingimportant features.ConnectionsPlug & socket input/outputsMains 240V ACMains module withEarth leakage protection (RCD)Overcurrent protection (MCBs)37