Swift Owner's Handbook - Swift Group

Toilet SectionThe toilet section includes a rotatable bowl,a removable seat and a control unit with aflush button and a waste level warningdevice. Under the bowl, the valve bladehandle is located.Preparing for Use1. To remove holding tank, open the accessdoor. Pull retaining clip upwards, (fig. 1)2. Remove holding tank by pulling straightout. When holding tank hits the stop, tiltdownwards slightly and remove. (fig. 2)3. Position tank vertically and swivel pouroutspout upwards. (fig. 3)4. Remove the cap of pour-out spout. Addrequired amount of toilet fluid throughpour-out spout. Add small amount ofwater through spout to cover holdingtank bottom. Replace cap and returnpour-out spout to its original storedposition. (fig. 4)NOTE: Hotter weather or longerretention time may require additionaltoilet fluid. Use only Thetford toiletfluid to achieve the best results.CAUTION: Never add toilet fluiddirectly into toilet bowl.5. Slide the holding tank into the vehiclethrough access door. (fig. 5)6. Make sure the holding tank is secured bythe retaining clip. Close and look accessdoor. (fig. 6)Operation7. Turn the bowl in the most comfortableposition, when necessary. (fig. 7)8. Before using the toilet we recommend toadd some water to the bowl by pressingthe flush button. Flush will stop when thebutton is released. (fig. 8)Fitted Equipment1 23 45 67 879