11.07.2015 Views

Swift Owner's Handbook - Swift Group

Swift Owner's Handbook - Swift Group

Swift Owner's Handbook - Swift Group

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

The gas flame is electronically lit, monitoredand re-lit if necessary. For this, the toggleswitch (E) should be ‘ON’ during gasoperation.The RM4291 is fitted with an internal lightwhich is operated by the door.STARTING THE REFRIGERATORLP Gas OperationBefore you start gas operation:1. Open the shut-off valve of the gas bottle(check that there is enough gas). Openany on-board shut-off valve.2. Check that the switches for mains and12V operation are OFF.3. Turn on gas supply by pressing knob (D)and turning it to the highest flameposition.4. Press ON switch (E). A light in the switchshould now start to flash, indicating thatsparks are being generated at the burner.5. When the flame ignites, the sparkingstops automatically and the switch stopsflashing.6. Keep the knob (D) pressed for a further10 to 15 seconds to activate the flamefailure device, then release it.7. To terminate gas operation turn knob (D)to the ‘•’ position and put switch (E) tothe OFF position.240V Operation1. Turn off gas or 12V operation whenapplicable.2. Turn the knob (C) of the thermostat to itshighest (coldest) position.3. Set switch (B) to position I. The switchwill light up green when the power supplyis connected.12V OperationOnly operate your refrigerator on 12V whenthe engine of your vehicle is running. Installthrough a relay, otherwise your battery willsoon be discharged.Note: Before operating the refrigerator on12V, it should be pre-cooled, together withits contents, by running it on bottled gas or240V for a few hours before changing overto 12V and starting on a journey.1. If applicable turn off the gas operation.2. Set the 12V rocker switch (A) to I. Theswitch will light up red when the powersupply is connected.Fitted EquipmentREGULATING THE TEMPERATUREThe position numbers refer to Fig. A.Once the refrigerator has been started it willtake a few hours to become cold.On 240V operation the refrigerator iscontrolled by a thermostat and thethermostat knob (C) should be set at 3-5.If a lower (colder) temperature is desired,set the thermostat to a higher figure.On LP gas operation the refrigeratortemperature is regulated by the gasthermostat knob (D), which should be set atthe medium ‘flame’ position. If a lower(colder) temperature is desired, set thethermostat to the larger ‘flame’ position.On 12V operation the refrigerator workscontinuously.WINTER OPERATION (ALL MODELS)Please check that ventilation grilles or theflue outlet are not blocked.Ventilation grille covers are available fromElectrolux and can be fitted to protect theunit against very cold air. These coversshould be fitted when the temperature isbelow 10°C and when the caravan is laidup during winter months.53

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!