6 modules - PI-VR GmbH

6 MODULESvariant set can be activated by double-clicking on it or by using the contextmenu.» Comment: Adds a custom comment to each Variant Set.» Screenshot: Creates a screenshot of the current scene.» Geometry tab Multiple Geometry Variants can be combined together in one GeometryVariant Set by dragging the desired Geometry Variants from the VariantsTab to the Geometry Tab of the Variant Sets. Make sure that at least one VariantSet is created. Each Geometry Variant can have different states. They willbe activated by double clicking on the Variant Set.» Material tab Multiple Material Variants can be combined together in one MaterialVariant Set, by dragging the desired Material Variants from the Variants Tab tothe Material Tab of the Variant Sets. Make sure, that at least one Variant Set iscreated. Each Material Variant can have different states. They will be activatedby double clicking on the Variant Set.» Light tab Multiple Light Variants can be combined together in one Light VariantSet, by dragging the desired Light Variants from the Variants Tab into the LightsTab of the Variant Sets. Make sure that at least one Variant Set is created. EachLight Variant Set can have different states. They will be activated by doubleclicking on the Variant Set.» View tab Multiple viewpoints can be added in this tab. You can make one of theviewpoints the default one by using the context menu. The default viewpointwill be activated whenever the variant set gets activated.» Animation tab Multiple initial animations can be added in this tab. If “SequentialAnimation” is not activated (default) all added animations will be executed atonce. Otherwise the first animation will be executed with the first activationof the variant set, the next animation with the next activation, and so on.» Analyzer tab Some Clipping Plane settings can be configured. For more informationplease refer to the Clipping module description.142