6 modules - PI-VR GmbH

6.4 Rendering• Parallel Channels: Number of parallel channels available to send back imagedata. Ideally, the number of channels corresponds with the numberof the cluster computers.• Switch to OpenGL on Cluter Exit: Switches to the OpenGL rendering modeafter cluter exit.• Advanced:· Parallel Receive: Used to debug internally.· Upload to Graphic Card] When disabling this function, the received imagewill not be uploaded to graphics card. The monitor will appearblack. The function helps to find out how much time a picture needs tobe uploaded to the graphics card.· Debug Output: Gives information about the tile distribution. You haveto execute with the -console option to get a extra console window.· Check License: Checks if all defined cluster slaves have a compatibleVRED version installed.» Network Settings: Some settings are highly specialized and should rarely betouched. If you need further information, please contact Autodesk.• Connection Type: Defines the connection type. Values are: Unicast, pipeline,multicast• Connection Params: Defines specific connection parameters. Default is”TTL=8”• Service Address: If you have more than one network card enter here yourip address with the last number replaced by 255 e.g. ”192.168.0.255”.• Multicast Group: Ip address of the multicast group.• Network Card IP: Add your ip address here if you have more than onenetwork card in your computer.• Direct Connection: Defines the port you may want to connect to.• Network Test: Starts the network connection test207