6 modules - PI-VR GmbH

7.1 Truelight Materials• Input Gamma: Sets the texture image gamma correction.• Use ICC Profile: If turned on, the texture’s colors will be interpreted basedon an embedded color profile if present. If a color profile is missing, it isassumed that the colors are stored in sRGB.» Yarn Texture Loads an image texture for the yarn. Uses the image as pattern onthe surfaces.» Repeat Mode UV: Sets the repeat mode of the texture. There are four modes,which can be set:• Repeat: Repeats the texture in all directions. Repeat• Mirrored Repeat: Repeats and mirrors the texture on the x- and y-axis withevery repetition.• Decal: The texture will not be repeated.• Clamp: Repeats only the last pixel of the texture will be repeated.» Link Repeat Modes: Uses the same repeat mode for v-coordinates as for theu-coordinates.» Repeat UV: Sets the number of repetitions for the Uvs.» Offset UV: Sets the offset for the UVs.» Rotate: Rotates the UVs.» Anisotropy: Sets the texture filter quality for the image texture. 1 is lowestquality. 16 is highest quality.» Input Gamma: Sets the texture image gamma correction.» Use ICC Profile: If turned on, the texture’s colors will be interpreted based onan embedded color profile if present. If a color profile is missing, it is assumedthat the colors are stored in sRGB.» Bump Texture» Use Structure: Activates a procedural bump structure.311