6 modules - PI-VR GmbH

3 MENUS AND TOOLBARS• Motion Factor: In ”Fly” navigation mode, the motion factor determinesthe speed at which the input device navigates through the scene. Thehigher the value, the faster the navigation.» Connector Using the connector, VRED instances can be synchronized for navigation,even on independent computers. This mode can be useful to comparevariants, for example. Besides navigation, python commands are synchronized.The usual workflow is to load a file separately on each VRED instance and connectthem together. Navigation should occur on the server. It is also possibleto navigate on the client, but it will be overridden by navigation steps on theserver.50» Settings:• Save: Connector-server settings can be stored. Press the Save Settingsbutton.» Connect to: Here, the connection settings can be entered, in case the currentVRED instance is a connection-slave.• Server: Sets the server IP. If the VRED instances run on the same machine,simply enter localhost.• Port: Sets the communication port address.• Disconnect: Deactivates the connector.• Connect: Activates the connector. If connecting to the server fails, checkif the port number matches and the server name is correct. Also ensurethat no firewall is blocking access.• Take Over Control: Requests the control of the current connector session.» Server: Here, the connection settings can be entered, in case this VRED instanceis a connection-server.• Port: Sets the communication port address.• Stop: Stops the connection-server.• Start: Starts the connection-server.