Logix5000 Controllers General Instructions - SLAC Confluence

164 Input/Output Instructions (MSG, GSV, SSV, IOT)MSG ConfigurationExamplesThe following examples show source and destination tags andelements for different controller combinations.For MSG instructions originating from a Logix5000 controller andwriting to another controller:Message PathExample Source and DestinationLogix5000 → Logix5000 source tag array_1[0]destination tag array_2[0]You can use an alias tag for the source tag (in originating Logix5000 controller).You cannot use an alias for the destination tag. The destination must be a base tag.Logix5000 → PLC-5source tagarray_1[0]Logix5000 → SLCdestination element N7:10You can use an alias tag for the source tag (in originating Logix5000 controller).Logix5000 → PLC-2 source tag array_1[0]destination element 010For MSG instructions originating from a Logix5000 controller andreading from another controller:Message PathExample Source and DestinationLogix5000 → Logix5000 source tag array_1[0]destination tag array_2[0]You cannot use an alias tag for the source tag. The source must be a base tag.You can use an alias tag for the destination tag (in originating Logix5000 controller).Logix5000 → PLC-5source element N7:10Logix5000 → SLCdestination tag array_1[0]You can use an alias tag for the destination tag (in originating Logix5000 controller).Logix5000 → PLC-2 source element 010destination tag array_1[0]Publication 1756-RM003I-EN-P - January 2007