Logix5000 Controllers General Instructions - SLAC Confluence

Move/Logical Instructions (MOV, MVM, BTD, MVMT, BTDT, CLR, SWPB, AND, OR, XOR, NOT, BAND, BOR, BXOR, BNOT) 323Input Parameter Data Type DescriptionIn7 BOOL Seventh boolean input.Default is cleared.In8 BOOL Eighth boolean input.Default is cleared.Output Parameter Data Type DescriptionEnableOut BOOL Enable output.Out BOOL The output of the instruction.Description:The BOR instruction ORs as many as eight boolean inputs. If an inputis not used, it defaults to cleared (0).Out = In1 OR In2 OR In3 OR In4 OR In5 OR In6 OR In7 OR In8Arithmetic Status Flags:Fault Conditions:not affectednoneExecution:Conditionprescaninstruction first scaninstruction first runEnableIn is clearedEnableIn is setpostscanFunction Block ActionNo action taken.No action taken.No action taken.EnableOut is cleared.The instruction executes.EnableOut is set.No action taken.Publication 1756-RM003I-EN-P - January 2007