Logix5000 Controllers General Instructions - SLAC Confluence

184 Input/Output Instructions (MSG, GSV, SSV, IOT)Attribute Data Type Instruction DescriptionPendingDuplicateDetection SINT SSV Pending value for the DuplicateDetection attribute.PendingEmbeddedResponse SINT SSV Pending value for the EmbeddedResponse attribute.EnablePendingENQTransmitLimit SINT SSV Pending value for the ENQTransmitLimit attribute.PendingEOTSuppression SINT SSV Pending value for the EOTSuppression attribute.PendingErrorDetection SINT SSV Pending value for the ErrorDetection attribute.PendingNormalPollGroupSize INT SSV Pending value for the NormalPollGroupSize attribute.PendingMasterMessage SINT SSV Pending value for the MasterMessageTransmit attribute.TransmitPendingNAKReceiveLimit SINT SSV Pending value for the NAKReceiveLimit attribute.PendingPollingMode SINT SSV Pending value for the PollingMode attribute.PendingReplyMessageWait DINT SSV Pending value for the ReplyMessageWait attribute.PendingStationAddress INT SSV Pending value for the StationAddress attribute.PendingSlavePollTimeout DINT SSV Pending value for the SlavePollTimeout attribute.PendingTransmitRetries SINT SSV Pending value for the TransmitRetries attribute.To apply values for any of the DF1 pending attributes:1. Use an SSV instruction to set the value for the pending attribute.You can set as many pending attributes as you want, using anSSV instruction for each pending attribute.2. Use a MSG instruction to apply the value. The MSG instructionapplies every pending attribute you set. Configure the MSGinstruction as:MSG Configuration Tab Field ValueConfiguration Message Type CIP GenericService Code0d hexObject Typea2Object ID 1Object Attributeleave blankSourceleave blankNumber of Elements 0Destinationleave blankCommunication Path communication path to self(1,s where s = slot numberof controller)Publication 1756-RM003I-EN-P - January 2007