Logix5000 Controllers General Instructions - SLAC Confluence

320 Move/Logical Instructions (MOV, MVM, BTD, MVMT, BTDT, CLR, SWPB, AND, OR, XOR, NOT, BAND, BOR, BXOR, BNOT)Input Parameter Data Type DescriptionIn7 BOOL Seventh boolean input.Default is set.In8 BOOL Eighth boolean input.Default is set.Output Parameter Data Type DescriptionEnableOut BOOL Enable output.Out BOOL The output of the instruction.Description:The BAND instruction ANDs as many as eight boolean inputs. If aninput is not used, it defaults to set (1).Out = In1 AND In2 AND In3 AND In4 AND In5 AND In6 AND In7 AND In8Arithmetic Status Flags:Fault Conditions:not affectednoneExecution:Conditionprescaninstruction first scaninstruction first runEnableIn is clearedEnableIn is setpostscanFunction Block ActionNo action taken.No action taken.No action taken.EnableOut is cleared.The instruction executes.EnableOut is set.No action taken.Publication 1756-RM003I-EN-P - January 2007