Red Hat Enterprise Linux 5 Administration Unleashed

36CHAPTER 1Installing Red Hat Enterprise Linux. iscsiThe Internet SCSI (ISCSI) protocol provides SCSI over TCP/IP networks for datatransfer. It is a lower cost alternative to a Fibre Channel storage area network (SAN).--ipaddr=IP address of remote connection.--target=Remote disk to connect to.--port=Port used to connect to target.--user=Username for remote connection, if required.--password=. iscsinamePassword for remote connection, if required.ISCSI initiator name. Must be a unique, per-host identifier used with ISCSI.. rootpw (required)Root password for the installed system. To specify an encrypted password, use the--isencrypted option before specifying the encrypted password.. timezone (required)Time zone for the installed system.Partitioning Commands. autopartCreate default partitions (a root (/) partition, swap partition, and /boot partition).The sizes of these partitions can be modified with the part directive.. clearpartRemove specific partitions or partition types before creating new partitions. If thiscommand is used, the --onpart command can’t be used on a logical partition.--allAll partitions are removed.--drives=All the partitions on the drives listed, such as hda or sdc, are removed.