Red Hat Enterprise Linux 5 Administration Unleashed

64CHAPTER 2Post-Installation ConfigurationFIGURE 2.9Creating a UserIf a sound card is detected, the Sound Card screen shows the vendor and model numberalong with the kernel module being used for it. To test the card, click Play test sound.You should hear a sound sample if the card is configured correctly. To configure or testthe sound card later, select the System menu from the top panel of the desktop and selectAdministration, Soundcard Detection or execute the system-config-soundcardcommand. You will be prompted for the root password before continuing if you start theapplication as a non-root user.The last screen is the Finish Setup screen. Click Next to exit the Setup Agent and go tothe login screen.Logging In for the First TimeAfter going through the Setup Agent, the graphical login screen appears if you installedthe graphical desktop. If you chose not to install the graphical desktop, a text-based loginprompt appears.At the login screen or prompt, type the username you configured on the Create Userscreen of the Setup Agent or any non-root user authenticated with a network service suchas Kerberos or NIS, press Enter, and type the password for the user.Upon successful authentication, the graphical desktop as shown in Figure 2.10 appears ifthe graphical desktop was installed, or a command prompt appears if the graphics subsystemwas not installed.