Red Hat Enterprise Linux 5 Administration Unleashed

Installing with Kickstart 39--maxsize=If --grow is used to allow the size of the partition to increase, this optionshould be set to the maximum size the partition is allowed to grow, inmegabytes.1--noformatDo not format partition. Use with --onpart directive.--onpart=Existing partition such as sda1 on which to place the partition. Use--noformat if you don’t want the existing partition to be formattedduring installation.--ondiskHard drive such as sda on which to create the partition.--asprimaryCreate partition as a primary partition or fail.--fstype=Filesystem type. Must be one of ext2, ext3, swap, or vfat.--fsoptions=Mounting options to use for the filesystem. They are copied to /etc/fstab.--bytes-per-inode=Size of inodes for the filesystem on the partition. Ignored if the filesystemspecified does not support this feature.--label=Filesystem label to use for the partition.--start=If --ondisk= is used, this directive can be used to provide a starting cylinderfor the partition. The ending cylinder must be listed with the --end= directive,and the partition size must be provided with --size=.--end=Ending cylinder for partition if --start= is used.--recommendedLet the installation program automatically calculate the size of the partitiondepending on free space available.--onbiosdiskCreate the partition on a specific hard drive as determined by the BIOS.