080121-08MN006-Sabina Hackett River Project Proposal ... - NIRB

Project Specific Information RequirementWaste Water (Grey water, Sewage, Other)25 Describe the quantities, treatment, storage, transportation, and disposal methodsfor the following (where relevant):• Sewage• Camp grey water• Combustible solid waste• Non-combustible solid waste• Bulky items/scrap metal• Waste oil/hazardous waste• Contaminated soils/snow• Empty barrels/ fuel drums• Any other waste produced26 If the project proposal includes a landfill or landfarm, indicate the locations on amap, provide the conceptual design parameters, and discuss waste managementand contact-water management procedures.Fuel27 Describe the types of fuel, quantities (number of containers, type of containers andcapacity of containers), method of storage and containment. Indicate the locationon a map where fuel is to be stored, and method of transportation of fuel to projectsite.28 Describe any secondary containment measures to be employed, including the typeof material or system used. If no secondary containment is to be employed, pleaseprovide justification.Section in ProjectProposal ReportSection 2.7, Section 2.6.6Section 2.6.6, Section 2.7 forwaste management andcontact-water management.See Chapter 9 for generalmanagement plans. Thelocation for a landfill iscurrently being evaluated aspart of the pre-feasibilitywork, which is expected tobe completed by summer2008.Section 2.6.4The locations for fuel storageare currently being evaluatedas part of the pre-feasibilitywork, which is expected tobe completed by summer2008.Section 2.6.4, Section 2.6.6,Section 2.6.1.729 Describe the method of fuel transfer and the method of refuelling. Section 2.9.3, Section2.6.1.7Chemicals and Hazardous MaterialsIncludes but not limited to oils, greases, drill mud, antifreeze, calcium or sodium chloride salt, lead acid batteries andcleaners30 Describe the types, quantities (number of containers, the type of container andcapacity of containers), method of storage and containment. Indicate the locationon a map where material is to be stored, and method of transportation of materialsto project site.31 Describe any secondary containment measures to be employed, including the typeof material or system used.32 Describe the method of chemical transfer. Section 2.6.6Workforce and Human Resources/Socio-Economic Impacts33 Discuss opportunities for training and employment of local Inuit beneficiaries. Chapter 334 Discuss workforce mobilization and schedule, including the duration of work and Chapter 3rotation length, and the transportation of workers to site.35 Discuss, where relevant, any specific hiring policies for Inuit beneficiaries. Chapter 3Section 2.6.6The locations for storage arecurrently being evaluated aspart of the pre-feasibilitywork, which is expected tobe completed by summer2008.Section 2.6.6