Vectra Genisys Service Manual - DJO Global

3- NOMENCLATUREVectra Genisys®/Intelect Legend XT®/ Intelect® Vet Therapy Systems3.1 VECTRA GENISYS, INTELECT LEGEND XT AND INTELECT VET THERAPY SYSTEMS (CONTINUED)F. Vectra Genisys and Intelect Vet Laser ModuleThe nomenclature graphic below, Figure 3.6,indicates the general locations of the exteriorcomponents of the Vectra Genisys and IntelectVet Therapy System Laser Module.Know the components and their functionsbefore performing any operation of or service tothe Therapy System Laser Module.6512437 8 9 10FIGURE 3.61. Laser Module2. Extended Front Access Panel3. Module to System Mounting Holes4. Module to System Feet Alignment Indents5. Power Cord Routing Port6. Module to System Header7. Patient Interrupt Switch (Optional)8. Therapy Room Door Lockout Jack9. Point Locator (for use with Single Applicator LaserApplicators)10. Laser ApplicatorNOTE:The Laser Module is not operable unless it is properlyconnected only to its Therapy System.NOTE:No Field Service is applicable to the Laser Module orLaser Applicators. All Laser Modules and Applicatorssuspected to require service or calibration must besent to the factory.• DO NOT point the laser beam directly intohuman or animal eyes. The lens of the eyedoes not detect the invisible, coherent laserbeams, potentially resulting in permanentretinal damage.• Class 3B Lasers are considered an acute hazardto the skin and eyes from direct radiation.Eye injury will occur if laser is viewed directlyor from specular reflection. Laser protectiveeyewear is required for all persons in thetreatment area.• Approved Laser protective eyewear must beworn at all times by all persons in the vicinitywhen the Laser is On.12