RealView Debugger User Guide - ARM Information Center

Working with Browsers and Favorites8.2.9 Working with the Modules tab• Narrow the search for a module, function, or variable to a specific image. To dothis, double-click on the image name. The Modules tab becomes the current tab(see Working with the Modules tab). Also:— the Functions tab lists those functions in the image that you have elected toshow in that tab— the Variables tab lists those variables in the image that you have elected toshow in that tab.The Modules tab in the Data Navigator pane lists the modules in all images by default,or in the image you selected from the Images tab (see Working with the Images tab onpage 8-9). You can also limit the list of modules by specifying a filter (see Applying afilter on page 8-6).Modules tab operationsYou can perform the following operations with the Modules tab:• Sort the modules in ascending or descending order of Module Name, Filename,or Image. To do this, click on the appropriate column header.• Narrow the search for a function or variable to a specific module. To do this,double-click on the required module entry:— By default, the Functions tab becomes the current tab (see Working with theFunctions tab on page 8-11). This tab lists those functions in the modulethat you have elected to show in that tab.— If you have checked the Goto Variables check box, the Variables tabbecomes the current tab (see Working with the Variables tab on page 8-14).This tab lists those variables in the module that you have elected to show inthat tab.• Locate the lowest address in memory that is occupied by the selected module, seeModules context menu on page 8-11 for details.8-10 Copyright © 2002-2005 ARM Limited. All rights reserved. ARM DUI 0153G