RealView Debugger User Guide - ARM Information Center

Working with Browsers and FavoritesScope ToLocates the start of the function in the current view of the File Editorpane:• If the Dsm tab is selected, the function is displayed in thedisassembly view.• If a source file tab is selected, for example dhry_1.c, and the chosenfunction is in that source file, that function is displayed.If the chosen function matches a source file that is not selected,RealView Debugger selects the source file. If the source file is notalready open, then RealView Debugger opens it.If the selected function is in an ARM library, then RealView Debugger isunable to display the source, and displays the following message in theSrc tab:No source for context: module\functionmodule\function is the function reference, for example, STDIO\fgetc.In all cases, RealView Debugger also locates the function in the Dsm tab.Select the Dsm tab to view the start address for the function.8.2.11 Working with the Variables tabThe Variables tab in the Data Navigator pane lists the variables in all functions bydefault, or in the module you selected from the Modules tab (see Working with theModules tab on page 8-10). You can also limit the list of variables displayed byspecifying a filter (see Applying a filter on page 8-6).Variables tab operationsYou can perform the following operations with the Variables tab:• Sort the variables in ascending or descending order of Variable Name, Address,Scope, Module, or Image. To do this, click on the appropriate column header.• Print the hexadecimal value of the variable to the Cmd tab of the Output pane. Todo this, double-click on the variable entry.• Various operations available from the Variables context menu. To display thiscontext menu, right-click on a variable entry. See Variables context menu onpage 8-15 for a description of these operations.8-14 Copyright © 2002-2005 ARM Limited. All rights reserved. ARM DUI 0153G