RealView Debugger User Guide - ARM Information Center

Working with Imagesto view. RealView Debugger expands the Sources entry and locates the first matchingoccurrence. When using this feature, the type ahead buffer is case insensitive and islimited to 128 characters. Do one of the following to clear the buffer:• select a different item• press Home to move to the top of the pane• press Escape.Getting more information about an entry in the Process tabRight-click on an entry in the Process tab to see the context menu associated with thatentry. Select Properties to see a text description of the item under the cursor.NoteThe options available from the context menu depend on which entry is selected and thecurrent state of the process or processor.2.2.3 Working with auto-projectsAn auto-project is an in-memory Custom project. The project settings are obtained fromthe image, where known. However, because no build details are known, the imagecannot be rebuilt from the auto-project. See the RealView Debugger v1.8 ProjectManagement User Guide for more details about auto-projects and Custom projects.When you load an image directly to a debug target, RealView Debugger checks to seeif an auto-project file exists for the image in the same location. Where an auto-projectexists, RealView Debugger opens it and then uses it to load the specified image. Whereno auto-project exists, RealView Debugger creates an in-memory auto-project to use inthis session.If, for example, you load the image dhrystone.axf, ininstall_directory\RVDS\Examples\...\dhrystone\DebugRel, RealView Debugger looksfor the corresponding auto-project file dhrystone.axf.apr, in the same location. Whereno auto-project exists, RealView Debugger creates an in-memory auto-project, nameddhrystone. The Process tab is then updated with the project details, shown in Figure 2-5on page 2-14.ARM DUI 0153G Copyright © 2002-2005 ARM Limited. All rights reserved. 2-13