RealView Debugger User Guide - ARM Information Center

Controlling ExecutionNoteAbsolute pathnames are used to define the new search rules when you configure themin this way. However, if you modify the source search path yourself, pathnames becomerelative (see Manually configuring search rules for details).3.6.3 Manually configuring search rulesIf you have an open project, you can specify search paths using the Project Propertieswindow. Any search that you define is then saved with the project settings andadditionally used to locate source files.To configure the search rules manually:1. Select Project → Project Properties... to display the Project Properties window,shown in Figure 3-5.Figure 3-5 Search rules in the Project Properties windowFor more details on other entries in this window see Source path mappings onpage 3-22.2. Right-click on Source_search and use Edit as Directory Name... to specify thesearch path to locate the missing source file.3. Click File → Save and Close to confirm your choice and close the ProjectProperties window.Do not leave the Project Properties window open when you are working with thedebugger. When searching for source files, RealView Debugger updates theproject properties as necessary. This fails if the window is already open.ARM DUI 0153G Copyright © 2002-2005 ARM Limited. All rights reserved. 3-21