AlphaCom XE - Zenitel

4 AlphaPro4.1 OverviewAlphaPro 11 is the tool for configuring the AlphaCom XE system. Itis self-contained, and simple to install and use. When a new server/exchange shall be configured, it is given a working default factorysetting (see tables in section 2.5). The operator can modify the settingssuch as:●●●●●●●●●●Directory informationGroupsInterfaces to CCTV, PA, paging, DECTAlphaNetOther custom behaviorThere are currently over 100 defined features which can beprogrammed with AlphaPro 11.AlphaPro 11 is an off-line tool. This means that it is possible to enter allparameters without being connected to the server/exchange. Once allparameters are entered, AlphaPro 11 can be connected to the server/exchange and the parameters can be sent. AlphaPro 11 can also uploadconfiguration information from a server/exchange.AlphaPro 11 connects to a server/exchange via the IP network or a localRS232 interface.4.1.1 AlphaPro versionsAlphaPro 11 comes in two versions. A hardware dongle is used todifferentiate between the versions.There are two types of hardware keys, one for parallel port and one forUSB port.The versions of AlphaPro are:●●AlphaPro M--Runs without a hardware key.It gives access to all features (except AlphaNet), and is only for 36subscribers.●●AlphaPro Professional--Uses the Professional hardware key.It gives access to all features. This version must be used whenextensive changes to the default Auto-load is made.4.1.2 Backwards compatibilityAlphaPro version 11 supports:●●AlphaCom E, AMC-IP version 10.xx●●AlphaCom AMC version 9.xLLOlder AlphaCom systems can easily be upgraded toAlphaCom XE.AlphaPro 11 supports uploading and conversion of an AMC version 9configuration database to an AMC-IP configuration database.26 AlphaCom XE - Installation, Configuration & OperationA100K10805