AlphaCom XE - Zenitel

AlphaCom XE7AlphaCom XE7AlphaCom XE7AlphaCom XE7VMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTORVMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTORAlphaCom XE7VMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTORVMP-D619# *1 2 3 4 5 STENTOFONAlphaCom XE7VMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTORVMP-D619# *1 2 3 4 5 STENTOFONAlphaCom XE7 AlphaCom XE7 AlphaCom XE71 2 34 5 67 8 9M 0 CVINGTORAlphaCom XE7AlphaCom XE7AlphaCom XE71 2 34 5 67 8 9M 0 CVINGTORVMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTORVMP-D619# *1 2 3 4 5 STENTOFON1 2 34 5 67 8 9M 0 CVINGTOR6 AlphaNet6.1 OverviewAlphaNet is STENTOFON’s internal networking technology developedfor critical communications. Some of the feature highlights of AlphaNetare:●●●●●●●●●●●●●●●●Group and conference callsVoIP bandwidth managementPriority handling of events and resourcesAlternative routingBackwards compatibilityAll features available over the networkVoIP, digital and analog infrastructure supportSIP clientsGroup and conference callsAlphaNet has full group and conference call capability.Each AlphaCom XE has a built-in multi-party conferencing unit,providing local mixing for group and conference calls. This local mixingallows AlphaCom XE to only use a single VoIP channel when setting upa group or conference call between servers.VoIP bandwidth managementHILOLOXAlphaNet provides bandwidth management, limiting the VoIP bandwidthfrom taking more capacity than provisioned.MEDMEDMEDIf a high priority call is set up when all VoIP channels are occupied,AlphaCom XE will immediately release the call with the lowest priority,thus allowing the high priority call to proceed.Priority handling of events and resourcesHIMED +All calls and events that are sent between nodes are marked withpriority.LOLO +MEDThis allows the system to act upon the priority, presenting and handlingthe events and calls in the correct order.XAlphaCom XE7 AlphaCom XE7 AlphaCom XE7BAIPAC-XE AC-XE AC-XERS232RS232AC RS232 AC RS232 ACIPRS232Alternative routingAlternative routing of calls allows call completion even when the primaryAlphaNet route is down.For alternative routing, AlphaCom XE can either use its secondary IPinterface or route the call over a traditional interface such as an analogor digital line.Backwards compatibilityAlphaCom XE provides 100% backwards compatibility betweentraditional AlphaNet technologies and the new VoIP AlphaNet.This backwards compatibility allows the mixing of new AlphaCom XEnodes working over IP with current nodes so configuration can bemaintained.LLAlphaCom XE has two RS232 ports which can be used forAlphaNet. If more ports are needed, an Ethernet to RS232converter must be used.A100K10805AlphaCom XE - Installation, Configuration & Operation35