AlphaCom XE - Zenitel

AlphaWeb●●Assign an IP address to each module (see sections 3.4.2 and 3.4.3)●●●●Enable Multimodule Data and VoIP Audio in the Filters setting (seesection 3.4.4)Enter the Master license key to enable the Multi Module (see section3.3)AlphaPro●●●●●●●●●●Click the Exchange & System iconSelect the multi module exchange from the listClick the System buttonSelect Eth1 as the Default VoIP Port and check the AddressEnter the IP address of the slave modules.LLOnly the Master Module supports serial port drivers and othercentral equipment and licenses like RIO, Paging, AlphaNet, SIPtrunk node and SIP Registrar Node.42 AlphaCom XE - Installation, Configuration & OperationA100K10805